NextSDS Logo
Safety Data Sheet EN

TOMATO KETCHUP FLV PDR - K178168000

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TOMATO KETCHUP FLV PDR - K178168000
Product Code
K178168000

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Food preparations

Manufacturers & Suppliers

I

IFF (NEDERLAND) BV

manufacturer

ZEVENHEUVELENWEG 60, 5048 AN TILBURG, Netherlands

+31134642211

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H318 Causes serious eye damage.

Precautionary Statements

P280 Wear protective gloves/ eye protection/ face protection.
P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Not applicable, product is a mixture.

Chemical Name CAS Number Concentration Hazardous
sodium hydrogen di(acetate) EC: 204-814-9 126-96-5 10 - 20% Yes
citric acid EC: 201-069-1 77-92-9 1 - 3% Yes
eugenol EC: 202-589-1 97-53-0 0.1 - 1% Yes
sucrose EC: 200-334-9 --- 25 - 50% No
sodium hydrogen glutamate EC: 205-538-1 --- 10 - 20% No
sodium chloride EC: 231-598-3 --- 10% No
silicon dioxide EC: 231-545-4 --- 10% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove from exposure site to fresh air and keep at rest. If victim is unconscious, remove foreign bodies from the mouth. If victim has stopped breathing, give artificial respiration. Obtain medical advice.

Skin contact

Remove contaminated clothes. Wash thoroughly with water (and soap). Contact physician if symptoms persist.

Eye contact

Flush immediately with water for at least 15 minutes. Contact physician if symptoms persist.

Ingestion

Rinse mouth with water and obtain medical advice.

Immediate Medical Attention

Obtain medical advice (for inhalation or ingestion). Contact physician if symptoms persist (for skin or eye contact).

Medical Treatment

No information available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Where appropriate, use closed systems to transfer and process this material. If appropriate, isolate mixing rooms and other areas where this material is used or openly handled. Maintain these areas under negative air pressure relative to the rest of the plant.

Hands

Avoid skin contact. Use chemically resistant gloves.

Eyes

Use tight-fitting goggles, face shield or safety glasses with side shields if eye contact might occur.

Respiratory

Use local exhaust ventilation around open tanks and other open sources of potential exposures in order to avoid excessive inhalation, including places where this material is openly weighed or measured. In addition, use general dilution ventilation of the work area to eliminate or reduce possible worker exposures. No respiratory protection is required during normal operations in a workplace where engineering controls such as adequate ventilation, etc. are sufficient. If engineering controls and safe work practices are not sufficient, an approved, properly fitted respirator with organic vapor cartridges or canisters and particulate filters should be used: a)while engineering controls and appropriate safe work practices and/or procedures are being implemented; or b)during short term maintenance procedures when engineering controls are not in normal operation or are not sufficient; or c)if normal operational workplace vapor concentration in the air is increased due to heat ; d)during emergencies; or e)if engineering controls and operational practices are not sufficient to reduce airborne concentrations below an established occupational exposure limit.

Environmental

Keep away from drains, surface- and groundwater and soil.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Kinematic Viscosity
not determined
Cloud Point
---
Boiling Point
not determined
Odor
not determined
Flash Point
Not applicable
Solubility
---
Upper Explosive Limit
not determined
Form
---
Physical State
---
Relative Evaporation Rate
---
Flammability
not determined
Explosive Limits
---
Solidification Point
---
Melting Point
not determined
Properties Status
---
Decomposition Temperature
---
Molecular Weight
---
Colour
pale orange to orange
Relative Density
---
Physical State Data
---
Dynamic Viscosity
not determined
Partition Coefficient
not determined
Solubility In Water
not determined
Auto Ignition Temperature
not determined
Lower Explosive Limit
not determined
Colour Intensity
---
Evaporation Rate
not determined
Ph
not determined
Vapor Density
---
Solubility In Fat
---
Odor Threshold
not determined
Softening Point
---
Freezing Point
---
Vapor Pressure
Not applicable
Appearance
powder
Voc Content
---
Bulk Density
---
Metal Corrosion
---
Density
not determined
Crystallisation Point
---
State Under Standard Conditions
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TOMATO KETCHUP FLV PDR - K178168000?

The signal word is danger.

What is TOMATO KETCHUP FLV PDR - K178168000 used for?

Food preparations

What are the hazard statements for TOMATO KETCHUP FLV PDR - K178168000?

This substance has 1 hazard statement:

  • H318: Causes serious eye damage.

What is the melting point of TOMATO KETCHUP FLV PDR - K178168000?

The melting point is not determined and the boiling point is not determined.