Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ANSULEX Low pH Liquid Fire Suppressant
- Product Code
- 1070-2-000 ANa
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Fire exintinguishing agent
Manufacturers & Suppliers
Tyco Fire Suppression and Building Products
manufacturer
One Stanton Street, Marinette, WI 54143-2542
715-735-7411
http://www.ansul.com
Emergency Contacts
CHEMTREC
800-424-9300
CHEMTREC
703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The manufacturer lists no ingredients as hazardous according to OSHA 29 CFR 1910.1200.
Notes
The manufacturer lists no ingredients as hazardous according to OSHA 29 CFR 1910.1200.
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. Call a physician if symptoms develop or persist.
Rinse skin with water/shower. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
Rinse mouth. If ingestion of a large amount does occur, call a poison control center immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing agent suitable for type of surrounding fire.
No unusual fire or explosion hazards noted.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unnecessary personnel away. Stop the flow of material, if this is without risk.
Wipe up with absorbent material (e.g. cloth, fleece). Never return spills in original containers for re-use.
Dike far ahead of spill for later disposal. Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal.
Prevent further leakage or spillage if safe to do so. Do not contaminate water.
Following product recovery, flush area with water. Clean surface thoroughly to remove residual contamination.
Materials: non-combustible material like vermiculite, sand or earth; absorbent material (e.g. cloth, fleece)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid release to the environment. Handle and open container with care.
Use care in handling/storage.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Not normally needed.
No personal respiratory protective equipment normally required.
No special protective equipment required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
None known.
Toxic gas. Nitrogen oxides (NOx).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in accordance with all applicable regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This product is not known to be a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ANSULEX Low pH Liquid Fire Suppressant?
The signal word is no signal word.
What is the physical form of ANSULEX Low pH Liquid Fire Suppressant?
ANSULEX Low pH Liquid Fire Suppressant is a liquid. with yellow green color. It has mild. odor.
What is ANSULEX Low pH Liquid Fire Suppressant used for?
Fire exintinguishing agent
What is the melting point of ANSULEX Low pH Liquid Fire Suppressant?
The melting point is Not available and the boiling point is Not available.