Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Decon 90 Liquid is a milk-white non-viscous liquid substance commonly used laboratory chemicals..
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS07
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H290: May be corrosive to metals
- H315: Causes skin irritation
- H319: Causes serious eye irritation
Precautionary Statements
- P280: Wear protective gloves/ protective clothing/ eye protection/ face protection
- IF ON SKIN: Wash with plenty of soap and water
- IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
- If eye irritation persists: Get medical advice/ attention
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Fisher Scientific UK
national supplier
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
GB
Acros Organics BVBA
national supplier
Janssen Pharmaceuticalaan 3a 2440 Geel, Belgium
BE
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
01509 231166
GB
CHEMTREC
800-424-9300
US
Inside the USA
CHEMTREC
001-703-527-3887
US
Outside the USA
Chemtrec
(800) 424-9300
US
US
Chemtrec
001 (202) 483-7616
US
EU
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixturesGeneral Composition
Anionic and non-ionic surface active agents, stabilising agents, non-phosphate detergent builders, and sequestering agents in water
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Potassium hydroxide EC: 215-181-3 | 1310-58-3 | 0.5-2% | ⚠️ Hazardous |
| Anionic and non-ionic surface active agents, stabilising agents, non-phosphate detergent builders, and sequestering agents in water | N/A | 98% | ✓ Non-hazardous |
Composition Notes
Full text of Hazard Statements: see section 16
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Move to fresh air. Obtain medical attention. If not breathing, give artificial respiration. If symptoms arise, call a physician.
🖐️ Skin Contact
Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
👁️ Eye Contact
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
🍽️ Ingestion/Swallowing
Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.
🚨 Immediate Medical Attention Required
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Ensure adequate ventilation, especially in confined areas. Wherever possible, engineering control measures such as the isolation or enclosure of the process, the introduction of process or equipment changes to minimise release or contact, and the use of properly designed ventilation systems, should be adopted to control hazardous materials at source
🧤 Hand Protection
Protective gloves Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information) Ensure gloves are suitable for the task: Chemical compatability, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
👁️ Eye Protection
Goggles (European standard - EN 166)
😷 Respiratory Protection
When workers are facing concentrations above the exposure limit they must use appropriate certified respirators. To protect the wearer, respiratory protective equipment must be the correct fit and be used and maintained properly In case of insufficient ventilation wear suitable respiratory equipment Recommended Filter type: Particulates filter conforming to EN 143 No personal respiratory protective equipment normally required When RPE is used a face piece Fit Test should be conducted
🦺 Skin/Body Protection
Long sleeved clothing
🌍 Environmental Exposure Controls
No information available.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Decon 90 Liquid?
The signal word for this substance is "warning".
What is the physical form of Decon 90 Liquid?
Decon 90 Liquid is a liquid appearing as milk-white non-viscous liquid . It has faint odor.
What is the solubility of Decon 90 Liquid?
No information available
What is Decon 90 Liquid used for?
Laboratory chemicals.
What are the hazard statements for Decon 90 Liquid?
This substance has 3 hazard statements: H290: May be corrosive to metals H315: Causes skin irritation H319: Causes serious eye irritation
What is the melting point of Decon 90 Liquid?
The melting point is -3.8 C and the boiling point is 100.5 C / 212.9 F.