Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ZX ABC DRY CHEMICAL EXTINGUISHER
- Product Code
- MODEL NO. PD1(A),PD2(E,A),PD2(E,A),PD4(E),PD6(E) PD6E-E(H), PD9(E),PD9E-E, PD12(E),PD12E-E, GPD6(E,-A,-B), GPD9(E,-A),GPD12(E,-A), PD25,PD50(E),GPD50(E), PD2.5LB(AL), PD5LB(AL,-H,-ALH), PD10LB(AL), PD20LB(AL)
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Fire Extinguishing Agent
Manufacturers & Suppliers
NINGBO ZHENGXIN FIRE-FIGHTING EQUIPMENT CO.,LTD
manufacturer
No.1 Jinhudong Rd, Huangjiabu Town Huangjiabu, 315466 / Yuyao, Zhejiang
+86 21 50410838
Http://www.zxfire.net
Emergency Contacts
Emergency Contact
+86 574 62003658
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS04
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Mono Ammonium Phosphate | 7722-76-1 | 75% | No |
| Ammonium Sulphate | 7783-20-2 | 18% | No |
| Silica Gel | 112926-00-8 | 0.2% | No |
| Nitrogen | 7727-37-9 | 6.8% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove from exposure, if irritation persists, Seek medical attention.
Wash affected area with soap and water. If irritation persists, seek medical attention.
Wash with water for a minimum of 15 minutes. If irritation persists, seek medical attention.
If patient is conscious, Give plenty of water including vomiting. Seek medical advice if necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use appropriate fire extinguisher for surrounding environment.
Ammonia and/or phosphorous oxides can be evolved at very high temperatures. Exposure to fire may cause container to rupture/explode.
In case of fire the product may be violently or explosively reactive. If safe to do so, remove containers from path of fire. Keep containers and fire-exposed surfaces cool with water spray.
Firefighter Protection
Fire fighters should wear self-contained breathing apparatus (SCUBA) and full protective clothing to prevent exposure to vapors, fumes or products of combustion. Avoid eye and skin contact.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid eye and skin contact. Wear appropriate personal protective equipment and clothing to minimize exposure.
If contamination of sewers or waterways occurs inform the local water and waste management authorities in accordance with local regulations.
Sweep or vacuum up contents and place in sealed labeled container or disposal.
Related Products
Similar products with comparable safety profiles
ABC Dry Chemical Fire Extinguishant
---
ABC Dry Chemical Fire Extinguishant
---
ABC Dry Chemical Powder
---
ANSULEX Low pH Liquid Fire Suppressant
---
Amerex Pressurised Argon Halotron 1 all models extinguishant
---
INDUCARE DRY CLEAN
---
EXTRA STRONG DETERGENT C20
---
ARDROX 9PR5 (+ HFR / OVERCHEK REMOVER) (AEROSOL)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of dust and skin or eye contact. Use only in a well ventilated area. Keep containers sealed when not in use. Prevent the build up of dust in the work atmosphere. Maintain high standards of personal hygiene i.e. Washing hands prior to eating, drinking, smoking or using toilet facilities.
Always store in dry, cool area out of direct sunlight in original container with lid tightly closed. Store in suitable, labeled containers. Keep containers closed when not in use. Ensure that storage conditions comply with applicable local and national regulations. Do not allow any part of a cylinder to be exposed above 50C. Storage areas should be keep clean and free from flammable materials. Ensure that containers are properly vented to prevent build up pressure.
Maintain high standards of personal hygiene i.e. Washing hands prior to eating, drinking, smoking or using toilet facilities.
Storage areas should be keep clean and free from flammable materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use with good general ventilation. If solids/dusts are produced, local exhaust ventilation should be used. Systems under pressure should be regularly checked for leakages.
chemical resistant gloves
chemical goggles
dust mask
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No special measures are necessary. Stable under normal ambient storage and handling conditions.
Reacts with incompatible materials.
No Information Available
Extremes of temperature and direct sunlight
None.
Ammonia and or Phosphorous oxides can be evolved at very high temperature.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste according to applicable local and national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1044
- Shipping Name
- Fire extinguishers with compressed or liquefied gas
- Transport Class
- 2.2
Not Available.
Not Available.
Not Available.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classified as hazardous according to the Globally harmonized System of classification and labeling of chemicals (GHS) including Work, health and Safety regulations. Not classified as a Scheduled Poison according to the Standard for the uniform Scheduling of medicines and Poisons (SUSMP).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ZX ABC DRY CHEMICAL EXTINGUISHER?
The signal word is warning.
What is the physical form of ZX ABC DRY CHEMICAL EXTINGUISHER?
ZX ABC DRY CHEMICAL EXTINGUISHER is a solid appearing as powder with blue, yellow color. It has no odour warning properties odor.
What is ZX ABC DRY CHEMICAL EXTINGUISHER used for?
Fire Extinguishing Agent
What are the hazard statements for ZX ABC DRY CHEMICAL EXTINGUISHER?
This substance has 1 hazard statement:
- H280: Contains gas under pressure; may explode if heated.
What is the melting point of ZX ABC DRY CHEMICAL EXTINGUISHER?
The melting point is No Information Available and the boiling point is No Information Available.