Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Cationic Surfactant Agglomerate
- Product Form
- Agglomerate
- Product Code
- RHS 10074746
Regulatory Identifiers
- CAS Number
- N/A
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The other ingredients are zeolite (64%) with the remainder being water and miscellaneous impurities.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| C8-C10 alkyl dimerethyl hydroxyethyl ammonium chloride | --- | 20% | Yes |
| zeolite | --- | 64% | No |
| water | --- | --- | No |
| miscellaneous impurities | --- | --- | No |
Notes
All concentrations may vary slightly due to batch to batch variations.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and allow to breathe normally.
wash off immediately with soap and water. If irritation ensues, seek medical attention.
Rinse thoroughly with plenty of water and seek medical advice.
Call a physician and show him/her this Safety Data Sheet.
Related Substances
Similar chemicals with comparable safety profiles
SURFACTANT AGGLOMERATE HAPAG 2 (LAS/TAS/AE3S)
---
SURFACTANT AGGLOMERATE G4 (LAS/AS/AE3S)
---
AEROSOL AY-100 SURFACTANT
CAS: 922-80-5
AEROSOL 18-P SURFACTANT
---
SURFACTANT AGGLOMERATE G5 SALSA (LAS)
---
AEROSOL LF-4 SURFACTANT
UFI: 8GA9-TAA7-V4A0-AN0E
DOWFAX 8390 Solution Surfactant
---
Heavy Alkylate
CAS: 84961-70-6
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves (rubber or neoprene)
Chemical goggles in dusty (> 1mg/Nm) conditions.
Protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- 10074746
Transport containers: Dry roadcar containers with ports closed to prevent water ingress. Big Bags: If product is stored in big bags, a polyethylene inner lining bag is required. The big bags must be completely sealed by folding over the top of the inner and outer bag and then tying shut. This is to prevent water from entering the inner bag. Bags MUST be stored indoors and should not be stacked on top of each other. Maximum size 1000 kg approx. 1.2 x 1 x 1m dimension.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Cationic Surfactant Agglomerate?
The signal word is no signal word.
What is the physical form of Cationic Surfactant Agglomerate?
Cationic Surfactant Agglomerate is a granular powder appearing as white, granular powder with white color. It has slight characteristic base odour. odor.