Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE
- Product Code
- 1083499
- Synonyms
- SC-78 BK ADDITIVE
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4-Nonylphenol, branched | 127087-87-0 | 30 - 60% | No |
| Phosphoric Acid Ester | --- | 30 - 60% | No |
| Phosphoric acid | 7664-38-2 | 5 - 10% | No |
| n-Butyl alcohol | 71-36-3 | 1 - 5% | No |
Notes
* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Flush with large amounts of water. If symptoms develop and persist, get medical attention.
Rinse immediately with plenty of water and seek medical advice.
Immediate medical treatment necessary. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Immediate medical treatment necessary for ingestion.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Do not direct a solid stream of water or foam into hot, burning pools; this may result in frothing and increase fire intensity.
This product is combustible at high temperatures.
Wear self-contained breathing apparatus. Wear full protective clothing.
Firefighter Protection
Wear self-contained breathing apparatus. Wear full protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE C-AD 142 SURFACTANT ADDITIVE
---
BONDERITE C-AD T51 S2 IBC1256KG Surfactant Additive
---
BONDERITE C-AD 166 CLEANER ADDITIVE
---
BONDERITE L-AD 2731 LUBRICANT ADDITIVE
---
BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE
---
BONDERITE C-AD DEFOAMER 220 LUBRICANT ADDITIVE
---
BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE
---
BONDERITE S-AD 145L ACID INHIBITOR ADDITIVE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. Do not take internally. Off gases from product may collect in the headspace of container during storage. Open container only in well-ventilated area or with respiratory protection.
Store between 0 °F (-17.8 °C) and 120 °F (48.9 °C). Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
Not available.
None under normal processing.
Store away from incompatible materials.
Keep separate from strong oxidizing and strong reducing agents.
Oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1760
- Shipping Name
- Corrosive liquid, n.o.s. (Phosphoric ester, Phosphoric acid)
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE known by?
BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE is also known as: SC-78 BK ADDITIVE
What is the hazard signal word for BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE?
The signal word is danger.
What is the physical form of BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE?
BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE is a liquid with gold color. It has mild odor.
What is the solubility of BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE?
Appreciable Water
What is BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE used for?
Additive
What are the hazard statements for BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE?
This substance has 3 hazard statements:
- H290: MAY BE CORROSIVE TO METALS.
- H302: HARMFUL IF SWALLOWED.
- H314: CAUSES SEVERE SKIN BURNS AND EYE DAMAGE.
What is the melting point of BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.