Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-AD 142 SURFACTANT ADDITIVE
- Synonyms
- PARCO CLEANER 142 ADD
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaners for industrial metal working
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
http://www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Poly(oxy-1,2-ethanediyl), .alpha.-[4-(1,1,3,3-tet | 9002-93-1 | 30 - 60% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.
Immediately flush skin with plenty of water (using soap, if available). If adverse health effects develop seek medical attention.
Immediately flush eyes with water for at least 15 minutes, while holding eyelids open. Seek medical attention at once.
Get medical attention. DO NOT induce vomiting unless directed to do so by medical personnel.
Immediate Medical Attention
Not available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use media appropriate for surrounding material.
Not available.
This product is an aqueous mixture which will not burn.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE
---
BONDERITE C-AD T51 S2 IBC1256KG Surfactant Additive
---
BONDERITE C-AD 166 CLEANER ADDITIVE
---
BONDERITE L-AD 2731 LUBRICANT ADDITIVE
---
BONDERITE S-AD 145 ACID INHIBITOR ADDITIVE
---
BONDERITE C-AD E2052 B
---
BONDERITE C-AD DEFOAMER 220 LUBRICANT ADDITIVE
---
BONDERITE S-AD 3305 ACID INHIBITOR ADDITIVE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes, skin and clothing. Do not take internally. For industrial use only.
Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.
Chemical resistant, impermeable gloves. Gloves should be tested to determine suitability for prolonged contact.
Wear chemical goggles; face shield (if splashing is possible).
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.
Use of impervious apron and boots are recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product may react with strong reducing agents.
None under normal processing.
Store away from incompatible materials.
Oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- Environmentally hazardous substance, liquid, n.o.s. (octylphenol+ 9 EO)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE C-AD 142 SURFACTANT ADDITIVE known by?
BONDERITE C-AD 142 SURFACTANT ADDITIVE is also known as: PARCO CLEANER 142 ADD
What is the hazard signal word for BONDERITE C-AD 142 SURFACTANT ADDITIVE?
The signal word is warning.
What is the physical form of BONDERITE C-AD 142 SURFACTANT ADDITIVE?
BONDERITE C-AD 142 SURFACTANT ADDITIVE is a liquid with light yellow color. It has mild odor.
What is the solubility of BONDERITE C-AD 142 SURFACTANT ADDITIVE?
Complete
What is BONDERITE C-AD 142 SURFACTANT ADDITIVE used for?
Cleaners for industrial metal working
What are the hazard statements for BONDERITE C-AD 142 SURFACTANT ADDITIVE?
This substance has 3 hazard statements:
- H302: HARMFUL IF SWALLOWED.
- H315: CAUSES SKIN IRRITATION.
- H319: CAUSES SERIOUS EYE IRRITATION.
What is the melting point of BONDERITE C-AD 142 SURFACTANT ADDITIVE?
The melting point is Not determined and the boiling point is > 100 °C (> 212°F)calculated.