Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FLAWFINDER DYE PENETRANT SPRAY
- Product Form
- SPRAY
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Dye penetrant.
Manufacturers & Suppliers
ROCOL
manufacturer
ROCOL House, Swillington, Leeds, West Yorkshire, LS26 8BS, ENGLAND
+44 (0) 113 232 2700
Emergency Contacts
Emergency Contact
+44 (0) 113 232 2600
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| MEDICINAL WHITE OIL EC: 232-455-8 | 8042-47-5 | --- | Yes |
| HYDROCARBON AEROSOL PROPELLANT (<0.1% 1,3-BUTADIENE) EC: 270-704-2 | 68476-85-7 | --- | Yes |
| ODOURLESS KEROSENE EC: 926-141-6 | 64742-47-8 | --- | Yes |
| ACETONE EC: 200-662-2 | 67-64-1 | --- | Yes |
| HYDROTREATED NAPHTHENIC DISTILLATE (NOTE L <3% DMSO EXTRACTABLE COMPONENTS) EC: 265-097-6 | 64741-96-4 | --- | Yes |
| 2-NAPHTALENOL, 1-[[4-(PHENYLAZO)PHENYL]AZO]-, AR-HEPTYL AR',AR"-ME DERIVS. EC: 296-120-8 | 92257-31-3 | --- | Yes |
| 1-PHENYLAZO-2-NAPHTHALENOL EC: 201-635-8 | 85-83-6 | --- | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty from exposure ensuring one's own safety whilst doing so. If conscious, ensure the casualty sits or lies down. If unconscious and breathing is OK, place in the recovery position. If unconscious, check for breathing and apply artificial respiration if necessary. If breathing becomes bubbly, have the casualty sit and provide oxygen if available. Transfer to hospital as soon as possible.
Symptoms: No symptoms.
Wash immediately with plenty of soap and water.
Symptoms: There may be mild irritation at the site of contact.
Bathe the eye with running water for 15 minutes.
Symptoms: There may be irritation and redness.
Wash out mouth with water.
Symptoms: There may be irritation of the throat.
Immediate Medical Attention
Transfer to hospital as soon as possible.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Suitable extinguishing media for the surrounding fire should be used.
In combustion emits toxic fumes.
Use water spray to cool containers.
Firefighter Protection
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact with skin and eyes.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Turn leaking containers leak-side up to prevent the escape of liquid. Mark out the contaminated area with signs and prevent access to unauthorised personnel.
Do not discharge into drains or rivers. Contain the spillage using bunding.
Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: dry earth or sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the substance. Ensure there is exhaust ventilation of the area. Avoid the formation or spread of mists in the air.
Store in a cool, well ventilated area. Keep container tightly closed. The floor of the storage room must be impermeable to prevent the escape of liquids.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The floor of the storage room must be impermeable to prevent the escape of liquids.
Protective gloves.
Safety glasses.
Respiratory protection not required.
Protective clothing.
No data available
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Stable under recommended transport or storage conditions.
Hazardous reactions will not occur under normal transport or storage conditions. Decomposition may occur on exposure to conditions or materials listed below.
Heat.
Strong oxidising agents. Strong acids.
In combustion emits toxic fumes.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transfer to a suitable container and arrange for collection by specialised disposal company.
Transfer to a suitable container and arrange for collection by specialised disposal company.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS, FLAMMABLE
- Transport Class
- 2.1
No special precautions.
No special precautions.
No special precautions.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FLAWFINDER DYE PENETRANT SPRAY?
The signal word is danger.
What is the physical form of FLAWFINDER DYE PENETRANT SPRAY?
FLAWFINDER DYE PENETRANT SPRAY is a aerosol with red color. It has characteristic odour odor.
What is FLAWFINDER DYE PENETRANT SPRAY used for?
Dye penetrant.
What are the hazard statements for FLAWFINDER DYE PENETRANT SPRAY?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
What is the melting point of FLAWFINDER DYE PENETRANT SPRAY?
The melting point is No data available. and the boiling point is No data available..