5553

Using proper respiratory protection, immediately remove the affected victim from exposure. Administer artificial respiration if breathing is stopped. Keep at rest. Call for prompt medical attention.

Flush with large amounts of water; use soap if available. Remove grossly contaminated clothing, including shoes, and launder before reuse. Consult a doctor, if irritation persists.

Immediately flush eyes with large amounts of water for at least 15 minutes. Get prompt medical attention.

If swallowed, do not induce vomiting. Keep at rest. Get prompt medical attention.

alcohol type foam or dry chemical extinguishers

Do not use water extinguisher in case of printer fire.

Use water spray to cool fire exposed surfaces and to protect personnel. Shut off "fuel" to fire. If a leak or spill has not ignited, use water spray to disperse the vapours and to protect men attempting to stop a leak. Either allow fire to burn under controlled conditions or extinguish with alcohol type foam or dry chemical extinguishers. Try to cover liquid spills with foam.

Warn occupants of downwind areas of fire and explosion hazard. Shut off source if possible to do so without hazard.

Take measures to minimize the effect on the ground water.

Recover by pumping or with a suitable absorbent. If liquid is too viscous for pumping, scrape up with shovels or pails and place in suitable containers for recycle or disposal.

Handle containers with care. Open slowly in order to control possible pressure release. Do not handle or open near an open flame, sources of heat or sources of ignition. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers without commercial cleaning or reconditioning. Container remains hazardous when empty. Continue to observe all precautions.

Keep container closed. Store in a cool, well-ventilated place away from incompatible materials. Do not store near an open flame, sources of heat or sources of ignition. Protect material from direct sunlight.

Do not store near an open flame, sources of heat or sources of ignition.

The use of mechanical dilution ventilation is recommended whenever this product is used in a confined space, is heated above ambient temperature or otherwise to maintain ambient concentration below the recommended threshold exposure limits. Use explosion-proof ventilation equipment.

When handling this product, it is recommended to wear chemical resistant gloves (butyl rubber). Gloves should be replaced immediately if sign of degradation is observed.

When handling this product, it is recommended to wear splash resistant goggles. Allow a washing solution for the eyes.

Where concentrations in air may exceed the limits given in this section, it is recommended to use a half face filter mask to protect from overexposure by inhalation.

stable

Hazardous polymerization: no

strong oxidizing agents

This product can be burned directly in appropriate equipment.

This product is not suitable for disposal by either landfill or via municipal sewers, drains, natural streams or rivers. This product can be burned directly in appropriate equipment.

S2 / S20

163