Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 3098
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesives
Manufacturers & Suppliers
Dymax Corporation
manufacturer
318 Industrial Lane Torrington, CT 06790
860-482-1010
Dymax Europe GmbH
undefined
Kasteler Strasse 45 Building G 359 65203 Wiesbaden Germany
+49-(0) 611-962-7900
Emergency Contacts
Chemtrec
1-800-424-9300
24hrs
Chemtrec
001-703-527-3887
24hrs
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Cycloaliphatic Epoxy Resin | --- | 60 - 70% | Yes |
| Propylene carbonate EC: 203-572-1 | 108-32-7 | 1 - 5% | Yes |
| Cationic Photoinitiator | --- | 1 - 5% | Yes |
| Polymer | --- | 20 - 30% | No |
Notes
The ingredients listed in this section have been determined to be hazardous and above threshold limits. For the full text of the R-phrases mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, If symptoms persist, call a physician.
Wash off immediately with soap and plenty of water, Get medical attention if irritation develops and persists.
Symptoms: irritation develops and persists.
Flush eyes with water at least 15 minutes. Get medical attention if eye irritation develops or persists.
Symptoms: eye irritation develops or persists.
Get medical attention.
Immediate Medical Attention
IN CASE OF SERIOUS OR PERSISTENT CONDITIONS, CALL A DOCTOR OR EMERGENCY MEDICAL CARE.
Medical Treatment
Treat symptomatically.
Related Substances
Similar chemicals with comparable safety profiles
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction.
Nitrile rubber, Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion.
Safety glasses with side-shields, If splashes are likely to occur, wear:, Goggles.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and/or protective equipment may be required.
Wear suitable protective clothing.
Do not allow material to contaminate ground water system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 3098?
The signal word is na: r-phrases.
What is the physical form of 3098?
3098 is a liquid appearing as transparent with colourless color. It has characteristic odor.
What is 3098 used for?
Adhesives