Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ULTRABIX ANNATTO POWER 15
- Product Code
- 03204
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Color Additive
Manufacturers & Suppliers
Sensient Colors Inc.
manufacturer
2526 Baldwin Street, St. Louis, MO 63106
1-800-325-8110
Emergency Contacts
Chemtrec
1-800-424-9300
24 hours
Chemtrec
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If breathing is difficult provide oxygen.
To reduce coloration of the skin, wash off immediately with soap and plenty of water removing all contaminated clothes and shoes to avoid coloration of the skin.
Immediately flush with plenty of water. After initial flushing, remove any contact lenses and continue flushing for at least 15 minutes. If symptoms persist, call a physician.
If the individual is conscious, clean mouth with water and afterwards drink plenty of water. Consult a physician if necessary.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Not available.
Keep product and empty container away from sources of heat.
Firefighter Protection
Use self-contained breathing apparatus and full protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent further leakage or spillage if safe to do so. Do not flush into surface water or sanitary sewer system.
Take up mechanically and collect in suitable container for disposal. Sweep or vacuum. Water or other cleanser may be used to facilitate clean up of buildings or equipment.
Materials: suitable container, Water or other cleanser
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. Avoid contact with skin and eyes. Do not breathe vapours/dust. Clean up residue to avoid dust accumulation.
Keep containers tightly closed in a cool, well-ventilated place.
Take precautionary measures against static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Minimize the creation of dust. Ensure adequate ventilation, especially in confined areas.
Safety glasses with side-shields.
No special protective equipment required under conditions of normal use. If exposure to dust, mist, and/or vapors is likely, a NIOSH approved respirator is recommended.
Long sleeved clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None under normal processing.
Heat, flames and sparks. Avoid dust formation.
No materials to be especially mentioned.
None under normal use. Material is non-combustible.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Dispose of in accordance with local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ULTRABIX ANNATTO POWER 15?
The signal word is warning.
What is the physical form of ULTRABIX ANNATTO POWER 15?
ULTRABIX ANNATTO POWER 15 is a powder .
What is ULTRABIX ANNATTO POWER 15 used for?
Color Additive
What are the hazard statements for ULTRABIX ANNATTO POWER 15?
This substance has 4 hazard statements:
- H303: May be harmful if swallowed
- H315: Irritating to skin
- H319: Irritating to eyes
- H335: Irritating to respiratory system