Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Interflon Food Lube G (aerosol)
- Product Form
- aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricant
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Interflon b.v.
manufacturer
P.O. Box 1070, NL-4700 BB Roosendaal, The Netherlands
+31(0)165.55.39.11
http://www.interflon.com
Emergency Contacts
UK National Poisons Emergency number
+44 870 600 6266
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Blend of mineral and vegetable oils, solvent, additives and Teflon. Propellant gas propane, butane and isobutane.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| butane EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 10 - 25% | Yes |
| Hydrocarbons, C7-C9, isoalkanes EC: 921-728-3 | --- | 10 - 25% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 2.5 - 10% | Yes |
| Amines, C11-14-branched alkyl, monohexyl and dihexyl phosphates EC: 279-632-6 | 80939-62-4 | 2.5% | Yes |
Note: Any entry in the EC column that begins with the number "9" is a Provisional List Number provided by ECHA pending publication of the official EC Inventory Number for the substance. See Section 16 for additional CAS number information for the substance.
Notes
This product does not contain "very worrisome substances" (SVHC) that are very dangerous to human health or the environment. (SVHC <0.1% (w / w) Regulation (EC) No. 1907/2006 (REACH), Article 57).
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7. Ventilation or extraction.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Protective gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Practical experience has shown that gloves of Nitril offer sufficient protection. Glove thickness: 0,13 mm. Breakthrough time: > 15 minutes. The penetration times are not determined by method EN 374 Part 3.
Tightly sealed goggles (EN166)
Do not breathe vapour and sprayer mist. Ventilation or extraction. Use suitable respiratory protective device in case of insufficient ventilation.
Protective work clothing (EN340)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Interflon Food Lube G (aerosol)?
The signal word is danger.
What is the physical form of Interflon Food Lube G (aerosol)?
Interflon Food Lube G (aerosol) is a aerosol with light brown color. It has petroleum-like odor.
What is the solubility of Interflon Food Lube G (aerosol)?
Not miscible or difficult to mix.
What is Interflon Food Lube G (aerosol) used for?
Lubricant
What are the hazard statements for Interflon Food Lube G (aerosol)?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Interflon Food Lube G (aerosol)?
The melting point is Not applicable. and the boiling point is < 0 C.