NextSDS Logo
Safety Data Sheet EN

Interflon Food Lube

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Interflon Food Lube
Product Form
Aerosol

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricant

Manufacturers & Suppliers

Interflon BV logo

Interflon BV

manufacturer

Belder 47, 4704 RK Roosendaal, Netherlands

+31 (0)165 553911

http://www.Interflon.com

Emergency Contacts

UK National Poison Centre

+44 870 600 6266

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosol Cat. 1 H229

GHS Pictograms

GHS02 - Flammable

GHS02

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of vegetable and synthetic oils, additives and Micpol®

Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, < 2% aromatics EC: 918-481-9 64742-48-9 25 - 50% Yes
butane EC: 203-448-7 106-97-8 10 - 25% Yes
Propane EC: 200-827-9 74-98-6 10 - 25% Yes
isobutane EC: 200-857-2 75-28-5 5 - 10% Yes
(Z)-N-methyl-N-(1-oxo-9-octa-decenyl)glycine EC: 203-749-3 110-25-8 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. Provide fresh air.

Skin contact

Wash with plenty of soap and water.

Eye contact

Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart.

Ingestion

Rinse mouth with water (only if the person is conscious).

Immediate Medical Attention

In all cases of doubt, or when symptoms persist, seek medical advice. If breathing is irregular or stopped, immediately seek medical assistance.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water mist, Fire extinguishing powder

Unsuitable media

Water jet

Specific hazards

In case of fire and/or explosion do not breathe fumes.

Instructions

Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

Firefighter Protection

Use suitable breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

For non-emergency personnel: Remove persons to safety. For emergency responders: Wear breathing apparatus if exposed to vapours/dust/spray/gases.

Environmental

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Cleanup methods

Place in appropriate containers for disposal.

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use local and general ventilation. Use only in well-ventilated areas. Remove contaminated clothing and protective equipment before entering eating areas. Never place chemicals in containers that are normally used for food or drink.

Storage

Store in accordance with local/regional/national/international regulations. Keep container tightly closed and in a well-ventilated place. Protect from sunlight. Keep in a cool place.

Hygiene

Remove contaminated clothing and protective equipment before entering eating areas. Never place chemicals in containers that are normally used for food or drink.

Fire prevention

Use local and general ventilation.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Use only in well-ventilated areas.

Hands

Not required.

Eyes

Use safety goggle with side protection.

Respiratory

In case of inadequate ventilation wear respiratory protection.

Skin/Body

Preventive skin protection (barrier creams/ointments) is recommended.

Environmental

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
aerosol
Physical State Data
aerosol
State Under Standard Conditions
---
Appearance
---
Colour
light brown
Colour Intensity
---
Form
---
Odor
Like oil
Odor Threshold
---
Ph
not determined
Melting Point
not determined
Boiling Point
<0 °C
Flash Point
<-60 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
4,200 hPa at 20 °C
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0.72 g/cm³ at 20 °C
Flammability
flammable aerosol in accordance with GHS criteria
Upper Explosive Limit
10 vol%
Lower Explosive Limit
0.6 vol%
Explosive Limits
---
Auto Ignition Temperature
235 °C (auto-ignition temperature (liquids and gases))
Decomposition Temperature
not relevant
Solubility
not determined
Partition Coefficient
this information is not available
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
not relevant
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

See below 'Conditions to avoid'.

Reactivity

The mixture contains reactive substance(s). Risk of ignition.

Hazardous reactions

No known hazardous reactions.

Avoid

Do not spray on an open flame or other ignition source. Keep away from heat. Protect from sunlight.

Incompatible

Oxidisers

Decomposition

Hazardous combustion products: see section 5.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Shall not be classified as hazardous to the aquatic environment.

The substance is not classified as hazardous to the aquatic environment.

12.2 Persistence and degradability

Data are not available.

Data are not available.

12.3 Bioaccumulative potential

Data are not available.

Data are not available.

12.4 Mobility in soil

Data are not available.

Data are not available.

12.5 Results of PBT and vPvB assessment

This mixture does not contain any substances that are assessed to be a PBT or a vPvB.

The mixture does not contain any substances that are assessed to be a PBT or a vPvB.

12.6 Endocrine disrupting properties

Does not contain an endocrine disruptor (EDC) in a concentration of ≥ 0,1%.

The substance does not contain an endocrine disruptor (EDC) in a concentration of ≥ 0,1%.

12.7 Other adverse effects

Data are not available.

Data are not available.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Waste shall be separated into the categories that can be handled separately by the local or national waste management facilities.

Disposal

It is a dangerous waste.

Waste Codes

13 02 06* synthetic engine, gear and lubricating oils EWC
15 01 04 metallic packaging EWC
16 05 04* gases in pressure containers (including halons) containing hazardous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2
Packing Group
not assigned
ADR

Provisions for dangerous goods (ADR) should be complied within the premises.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Interflon Food Lube?

The signal word is danger.

What is the physical form of Interflon Food Lube?

Interflon Food Lube is a aerosol with light brown color. It has like oil odor.

What is the solubility of Interflon Food Lube?

not determined

What is Interflon Food Lube used for?

Lubricant

What are the hazard statements for Interflon Food Lube?

This substance has 2 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurised container: May burst if heated.

What is the melting point of Interflon Food Lube?

The melting point is not determined and the boiling point is <0 °C.