Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KRONES celerol FL 7203
- Product Code
- 0903150669
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricating oil
Uses advised against
None known.
Manufacturers & Suppliers
KIC KRONES Internationale Cooperationsgesellschaft mbH
manufacturer
Böhmerwaldstraße 5 93073 Neutraubling / GERMANY
+49 9401 70-3020
www.kic-krones.com
Emergency Contacts
Advisory body
+49 (0)89-19240
24h
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Synthetic polyalphaolefin with lubrication-active additives.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amines,C11-14-branched alkyl,monohexyl and dihexylphosphates EC: 279-632-6 | 80939-62-4 | 0.1 - 1% | No |
| (Z)-N-methyl-N-(1-oxo-9-octadecenyl)glycine EC: 203-749-3 | 110-25-8 | --- | No |
For full text of H-statements: see SECTION 16.
Notes
Substances of Very High Concern - SVHC: substances are not contained or are below 0,1%.
First Aid Measures
Emergency procedures for chemical exposure incidents
When in contact with the skin, clean with soap and water. Consult a doctor if skin irritation persists.
Symptoms: skin irritation
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: eye irritation
Do not induce vomiting. Supply with medical care.
Immediate Medical Attention
Treat symptomatically.
Medical Treatment
Supply with medical care. Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC-powder. Dry powder. Foam. Carbon dioxide.
Water.
Risk of formation of toxic pyrolysis products.
Firefighter Protection
Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear suitable protective equipment. For personal protection see SECTION 8.
Do not discharge into the drains/surface waters/groundwater. Prevent spread over a wide area (e.g. by containment or oil barriers).
Pick up with absorbent material (e.g. sand, sawdust, universal absorbent, diatomaceous earth).
Materials: absorbent material (e.g. sand, sawdust, universal absorbent, diatomaceous earth)
Related Substances
Similar chemicals with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use only in well-ventilated areas. The normal safety precautions for handling chemicals must be observed. The product is combustible.
Keep only in original container. Keep container tightly closed. Keep container in a well-ventilated place. Protect from heat/overheating and from sun. Keep in a cool place. Store in a dry place. Recommended storage temperature: room temperature.
Do not eat, drink, smoke or take drugs at work. Remove soiled clothing. Cloths contaminated with product should not be kept in trouser pockets. Wash hands before breaks and after work. Use barrier skin cream.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation on workstation.
The details concerned are recommendations. Please contact the glove supplier for further information. Nitrile rubber, >480 min (EN 374). Neoprene, >480 min (EN 374). PVC (EN 374).
If there is a risk of splashing: Tightly fitting goggles.
Not required under normal conditions.
Protective clothing.
Comply with applicable environmental regulations limiting discharge to air, water and soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal ambient conditions (ambient temperature).
No dangerous reactions known if used as directed.
Reactions with strong oxidizing agents.
To avoid thermal decomposition, do not overheat. Keep away from open flames, hot surfaces and sources of ignition.
See SECTION 10.3.
No dangerous reactions known if used as directed.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations.
Coordinate disposal with the authorities if necessary. Disposal in an incineration plant in accordance with the regulations of the local authorities.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KRONES celerol FL 7203?
The signal word is no signal word.
What is the physical form of KRONES celerol FL 7203?
KRONES celerol FL 7203 is a liquid with colourless color. It has characteristic odor.
What is KRONES celerol FL 7203 used for?
Lubricating oil
What is the melting point of KRONES celerol FL 7203?
The melting point is ca. -40°C and the boiling point is > 280°C.