Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- KRONES celerol LU 7602
- Product Code
- 0903088789
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Uses advised against
None known.
Manufacturers & Suppliers
KIC KRONES Internationale Cooperationsgesellschaft mbH
manufacturer
Böhmerwaldstraße 5, 93073 Neutraubling / GERMANY
+49 9401 70-3020
http://www.kic-krones.com
Emergency Contacts
Advisory body
+49 (0)89-19240
24h
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Synthetic hydrocarbon oil, aluminium complex soap.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 2,6-di-tert-butyl-p-cresol EC: 204-881-4 | 128-37-0 | 0.25 - 1% | No |
| (Z)-N-methyl-N-(1-oxo-9-octadecenyl)glycine EC: 203-749-3 | 110-25-8 | 0.25 - 1% | No |
| 2-(2-heptadec-8-enyl-2-imidazolin-1-yl)ethanol EC: 202-414-9 | 95-38-5 | 0.25 - 1% | No |
Substances of Very High Concern - SVHC: substances are not contained or are below 0.1%. All chemical substances in this material are included on or exempted from listing on the TSCA Inventory.
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air.
In case of contact with skin wash off immediately with soap and water.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Do not induce vomiting. Rinse mouth.
Immediate Medical Attention
In the event of symptoms seek medical treatment. Consult a doctor if skin irritation persists. If eye irritation persists: Get medical advice/attention. Seek medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, dry powder, water spray jet, carbon dioxide
Full water jet
Risk of formation of toxic pyrolysis products.
Do not inhale explosion and/or combustion gases.
Firefighter Protection
Use self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Use personal protective equipment. Some risk of slipping due to spillage of product.
Do not discharge into the drains/surface waters/groundwater.
Take up mechanically. Take up residues with absorbent material.
Materials: sand, sawdust, general purpose binder, diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Use personal protective equipment. Take off contaminated clothing and wash before reuse. Use barrier skin cream.
Keep container tightly closed. Keep container in a well-ventilated place. Keep in a cool place. Store in a dry place.
Do not eat, drink, smoke or take drugs at work. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation on workstation. Measurement methods for taking workplace measurements must meet the performance requirements of DIN EN 482. For example, recommendations are given in the IFA's list of hazardous substances.
> 0,11 mm, Butyl rubber, >240 min (EN 374-1/-2/-3). The details concerned are recommendations. Please contact the glove supplier for further information.
safety glasses (EN 166:2001)
If ventilation is insufficient, wear respiratory protection. Short term: filter apparatus, filter A. (DIN EN 14387)
Oil-resistant protective clothing.
Comply with applicable environmental regulations limiting discharge to air, water and soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal ambient conditions (ambient temperature).
No dangerous reactions known if used as directed.
Reactions with oxidizing agents.
No information available.
See SECTION 10.3.
In the event of fire: See SECTION 5.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for KRONES celerol LU 7602?
The signal word is no signal word.
What is the physical form of KRONES celerol LU 7602?
KRONES celerol LU 7602 is a solid with beige color. It has product specific odor.
What is KRONES celerol LU 7602 used for?
Grease
What are the hazard statements for KRONES celerol LU 7602?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of KRONES celerol LU 7602?
The melting point is > 250 °C (DIN ISO 2176) and the boiling point is No information available..