Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- VERSACHEM MAGNUM STEEL EPOXY STICK 2 OZ.
- Product Code
- 44029
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Sealant
Uses advised against
No information available
Manufacturers & Suppliers
ITW Permatex
manufacturer
10 Columbus Blvd., Hartford, CT 06106 USA
(800) 924-6994
ITW Permatex Canada
distributor
35 Brownridge Road, Unit 1, Halton Hills, ON Canada L7G 0C6
1-87-Permatex (877) 376-2839
Emergency Contacts
Chem-Tel
800-255-3924
International Emergency
00+1+ 813-248-0585
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| MAGNESIUM SILICATE | 14807-96-6 | 30 - 60% | No |
| BISPHENOL A/EPICHLOROHYDRIN BASED EPOXY RESIN | 25068-38-6 | 10 - 30% | No |
| GLASS OXIDE | 65997-17-3 | 10 - 30% | No |
| FERROSILICON | 8049-17-0 | 10 - 30% | No |
| NEPHELINE SYENITE | 37244-96-5 | 1 - 5% | No |
| SILICA, QUARTZ | 14808-60-7 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If symptoms persist, call a physician.
IF ON SKIN.: Wash with soap and water. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
IF SWALLOWED.: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Call a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry chemical, Foam
None.
None in particular.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation, especially in confined areas. Avoid contact with eyes and skin. Use personal protective equipment as required.
Do not flush into surface water or sanitary sewer system. Collect spillage.
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
VERSACHEM ANTI-SEIZE THREAD LUBRICANT 8 OZ.
---
CHARBONNEL BATON LITHO / TUSCHE STICK
---
EVO-STIK 528 CONTACT ADHESIVE
---
EVO-STIK STICKS LIKE SH*T ADHESIVE WHITE
---
D.E.R.* 331 EPOXY RESIN
---
SUPER FAST GLUE - 28 ML / 30 G
UFI: 4W1D-D0PX-3007-M677
RS Quick Set Epoxy Adhesive
UFI: 3DY2-G0AG-Q00F-539M
HEMPADUR MASTIC 45889
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Avoid breathing vapors or mists. Avoid contact with skin, eyes or clothing. Wash thoroughly after handling. Wash contaminated clothing before reuse. Use personal protective equipment as required.
Store locked up.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Showers, Eyewash stations, Ventilation systems
Wear protective gloves
Wear safety glasses with side shields (or goggles).
Use NIOSH-approved air-purifying respirator with organic vapor cartridge or canister, as appropriate.
Wear protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No data available
None under normal processing.
Excessive heat.
Strong oxidizing agents
Carbon oxides, Oxides of sulfur, Metal oxides
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal of wastes
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for VERSACHEM MAGNUM STEEL EPOXY STICK 2 OZ.?
The signal word is danger.
What is the physical form of VERSACHEM MAGNUM STEEL EPOXY STICK 2 OZ.?
VERSACHEM MAGNUM STEEL EPOXY STICK 2 OZ. is a solid appearing as gray with gray color. It has pungent sulfur odor.
What is the solubility of VERSACHEM MAGNUM STEEL EPOXY STICK 2 OZ.?
No information available
What is VERSACHEM MAGNUM STEEL EPOXY STICK 2 OZ. used for?
Sealant
What are the hazard statements for VERSACHEM MAGNUM STEEL EPOXY STICK 2 OZ.?
This substance has 4 hazard statements:
- H315: Causes skin irritation
- H317: May cause an allergic skin reaction
- H319: Causes serious eye irritation
- H350: May cause cancer
What is the melting point of VERSACHEM MAGNUM STEEL EPOXY STICK 2 OZ.?
The melting point is No information available and the boiling point is No information available.