NextSDS Logo
Safety Data Sheet EN

LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH
Product Code
EB4322-B50A2

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Part B of 2-Component Epoxy Adhesive.

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

http://www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1
Resp. Sens. Cat. 1
Skin Sens. Cat. 1
STOT SE Cat. 3

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 MAY CAUSE AN ALLERGIC SKIN REACTION.
H318 CAUSES SERIOUS EYE DAMAGE.
H334 MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
H335 MAY CAUSE RESPIRATORY IRRITATION.

Precautionary Statements

P261 Avoid breathing mist/vapours.
P271 Use only outdoors or in a well-ventilated area.
P272 Contaminated work clothing should not be allowed out of the workplace.
P280 Wear protective gloves, eye protection, and face protection.
P284 [In case of inadequate ventilation] wear respiratory protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P333 + P313 If skin irritation or rash occurs: Get medical attention.
P342 + P311 If experiencing respiratory symptoms: Call a poison center or physician.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or physician if you feel unwell.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Silica, amorphous, naturally 60676-86-0 60 - 80% Yes
Substituted anhydride --- 10 - 30% Yes
Substituted phthalic anhydride 34090-76-1 1 - 5% Yes
benzene-1,2,4-tricarboxylic acid 1,2-anhydride 552-30-7 1 - 5% Yes
Toluene 108-88-3 1 - 5% Yes
4,4'-carbonyldiphthalic acid compd. with 2-methyl-1H-imidazole (1:2) 172140-94-2 0.1 - 1% Yes
7-Oxabicyclo[4.1.0]hept-3-ylmethyl 7-oxabicyclo[4.1.0]heptane-3-carboxylate 2386-87-0 0.1 - 1% Yes
Epichlorohydrin-4,4'-isopropylidene diphenol resin 25068-38-6 0.1 - 1% Yes

Notes

* Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.

Skin contact

Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.

Ingestion

Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Seek immediate medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray (fog), foam, dry chemical or carbon dioxide.

Unsuitable media

Not available.

Specific hazards

Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.

Instructions

In case of fire, keep containers cool with water spray.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Do not allow product to enter sewer or waterways.

Cleanup methods

Ensure adequate ventilation. Remove all sources of ignition. Keep unnecessary personnel away. Wear appropriate personal protective equipment. Refer to Section 8 "Exposure Controls / Personal Protection" prior to clean up. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wear suitable protective clothing, safety glasses and gloves. Keep container closed.

Storage

Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Store in a dry place. Store in original container until ready to use.

Hygiene

Wash thoroughly after handling. When using do not eat, drink or smoke.

Fire prevention

Remove all sources of ignition. Keep away from heat, spark and flame.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Density
---
Vapor Pressure
2.0 mm hg 0.2 mm hg < 3 hPa (20 °C (68°F)) 0.3 hPa (20 °C (68°F))
Appearance
---
Flash Point
> 150 °C (> 302°F)
Evaporation Rate
< 1.0 < 0.1
Ph
Not applicable, Product is non-soluble (in water).
Molecular Weight
---
Relative Evaporation Rate
---
Freezing Point
---
Colour
Black
Melting Point
Not applicable, Product is a liquid
State Under Standard Conditions
---
Boiling Point
Not applicable, Decomposes before boiling point is reached
Decomposition Temperature
Not available.
Solubility In Water
---
Cloud Point
---
Relative Density
1.8
Properties Status
---
Physical State
Liquid
Upper Explosive Limit
Not available.
Dynamic Viscosity
Not available.
Softening Point
---
Odor
Aromatic
Flammability
Not applicable
Kinematic Viscosity
> 30 mm2/s
Voc Content
0 %; 0 g/l (ASTM D2369)
Crystallisation Point
---
Auto Ignition Temperature
Not determined
Explosive Limits
---
Partition Coefficient
Not available.
Physical State Data
liquid
Colour Intensity
---
Solubility In Fat
---
Solubility
Insoluble Water; Partially miscible ketones
Vapor Density
---
Odor Threshold
Not available.
Bulk Density
---
Lower Explosive Limit
Not available.
Form
---
Metal Corrosion
---
Solidification Point
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions of storage and use.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.

Incompatible

Oxidizing agents. Acids. Bases. Amines.

Decomposition

Oxides of carbon. Phenolics. Toxic fumes. Irritating vapors.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH?

The signal word is danger.

What is the physical form of LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH?

LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH is a liquid with black color. It has aromatic odor.

What is the solubility of LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH?

Insoluble Water; Partially miscible ketones

What is LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH used for?

Part B of 2-Component Epoxy Adhesive.

What are the hazard statements for LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH?

This substance has 4 hazard statements:

  • H317: MAY CAUSE AN ALLERGIC SKIN REACTION.
  • H318: CAUSES SERIOUS EYE DAMAGE.
  • H334: MAY CAUSE ALLERGY OR ASTHMA SYMPTOMS OR BREATHING DIFFICULTIES IF INHALED.
  • H335: MAY CAUSE RESPIRATORY IRRITATION.

What is the melting point of LOCTITE STYCAST EB 4322 known as HYSOL EB4322 GAL EU FR&GER/VISH?

The melting point is Not applicable, Product is a liquid and the boiling point is Not applicable, Decomposes before boiling point is reached.