LOCTITE ECCOBOND EN UV9721 30CC

If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.

Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.

Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.

Foam, dry chemical or carbon dioxide.

High volume water jet.

Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.

In case of fire, keep containers cool with water spray.

Isolate the hazard area and deny entry to unnecessary and unprotected personnel. Evacuate and ventilate spill area; dike spill to prevent entry into water system; wear full protective equipment during clean-up.

Do not allow product to enter sewer or waterways.

Soak up with inert absorbent material. Scrape up as much material as possible. Use only non-sparking tools.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Wear suitable protective clothing, safety glasses and gloves. When using do not eat, drink or smoke.

Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. Store in sealed original container. Maintain head space in storage containers to support oxygen requirements of the inhibitor(s). Store frost-free. Keep out of direct sunlight. Never use drum band heaters.

Wash thoroughly after handling. Remove clothing and protective equipment contaminated before entering in food areas. When using do not eat, drink or smoke.

Keep area ventilated - do not smoke; extinguish all flames, pilot lights, and heaters; turn off stoves, electrical tools and appliances, and any other sources of ignition.

Stable under normal conditions of storage and use.

Not available.

Exothermic. Polymerization may occur at elevated temperature or in the presence of incompatible materials.

High temperatures. Avoid temperatures above 300°C (572°F). Extremes of temperature and direct sunlight. Heat, flames, sparks and other sources of ignition. Store away from incompatible materials. Loss of polymerization inhibitor. Loss of dissolved air. UV light. Exposure to sunlight. Freezing conditions. Take measures to prevent the build-up of electrostatic charges.

Acids. Bases. Strong reducing agents. Free radical initiators. Inert gases. Oxygen scavengers. Strong oxidizing agents. Amines, strong alkalies Reactive metals. Peroxides. Azo-compounds. Water. Moisture.

Oxides of carbon. Oxides of nitrogen. Hydrogen cyanide. Organic compounds. Oxides of silicon. Toxic fumes. Irritating organic vapours.