Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Divosan Extra VT55
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
For professional and industrial use only. AISE-P314 - Surface disinfectant. Manual process, AISE-P315 - Surface disinfectant. Spray and rinse manual process, AISE-P811 - Disinfection product. Fogging and gassing. Semi-automatic process
Uses advised against
Uses other than those identified are not recommended
Manufacturers & Suppliers
Diversey local operating company
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| alkyldimethylbenzylammonium chloride EC: 270-325-2 | 68424-85-1 | 10 - 20% | Yes |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 0.1 - 1% | Yes |
For the full text of the R, H and EUH phrases mentioned in this Section, see Section 16. Workplace exposure limit(s), if available, are listed in subsection 8.1.
Notes
* Polymer. [1] Exempted: ionic mixture. See Regulation (EC) No 1907/2006, Annex V, paragraph 3 and 4. This salt is potentially present, based on calculation, and included for classification and labelling purposes only. Each starting material of the ionic mixture is registered, as required. [2] Exempted: included in Annex IV of Regulation (EC) No 1907/2006. [3] Exempted: Annex V of Regulation (EC) No 1907/2006. [4] Exempted: polymer. See Article 2(9) of Regulation (EC) No 1907/2006.
First Aid Measures
Emergency procedures for chemical exposure incidents
Get medical attention or advice if you feel unwell.
Symptoms: No known effects or symptoms in normal use.
Wash skin with plenty of lukewarm, gently flowing water for at least 30 minutes. Take off immediately all contaminated clothing and wash it before re-use. Immediately call a POISON CENTRE, doctor or physician.
Symptoms: Causes severe burns.
Immediately rinse eyes cautiously with lukewarm water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or physician.
Symptoms: Causes severe or permanent damage.
Rinse mouth. Immediately drink 1 glass of water. Do NOT induce vomiting. Keep at rest. Immediately call a POISON CENTRE, doctor or physician.
Symptoms: Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
Immediate Medical Attention
Immediately call a POISON CENTRE, doctor or physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.
No special hazards known.
Firefighter Protection
As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drainage system, surface or ground water. Do not allow to enter the ground/soil. Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Sealed Air. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Use personal protective equipment as required. Avoid contact with skin and eyes. Use only with adequate ventilation.
Store in accordance with local and national regulations. Keep only in original container. Store in a closed container.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Sealed Air. Wash hands before breaks and at the end of workday. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.
No special precautions required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required. Use only in well ventilated areas.
Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber, Penetration time: >= 480 min, Material thickness: >= 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber, Penetration time: >= 30 min, Material thickness: >= 0.4 mm. For diluted product: Rinse and dry hands after use. For prolonged contact protection for the skin may be necessary.
Safety glasses or goggles (EN 166). For diluted product: No special requirements under normal use conditions.
No special requirements under normal use conditions. If exposure to liquid particles cannot be avoided use: self-contained or compressed air breathing apparatus (EN 137 / EN 138). Consider specific local use conditions. In consultation with the supplier of respiratory protection equipment a different type providing similar protection may be chosen.
Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes may occur. For diluted product: No special requirements under normal use conditions.
Should not reach sewage water or drainage ditch undiluted or unneutralised. For diluted product: No special requirements under normal use conditions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal storage and use conditions.
No reactivity hazards known under normal storage and use conditions.
No hazardous reactions known under normal storage and use conditions.
None known under normal storage and use conditions.
None known under normal use conditions.
None known under normal storage and use conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.
The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3267
- Shipping Name
- Corrosive liquid, basic, organic, n.o.s. ( alkyldimethylbenzylammoniumchloride )
- Transport Class
- 8
- Packing Group
- III
None known.
None known.
None known.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Divosan Extra VT55?
The signal word is danger.
What is the physical form of Divosan Extra VT55?
Divosan Extra VT55 is a liquid with clear, colourless color. It has product specific odor.
What is the solubility of Divosan Extra VT55?
Fully miscible
What is Divosan Extra VT55 used for?
For professional and industrial use only. AISE-P314 - Surface disinfectant. Manual process, AISE-P315 - Surface disinfectant. Spray and rinse manual process, AISE-P811 - Disinfection product. Fogging and gassing. Semi-automatic process
What are the hazard statements for Divosan Extra VT55?
This substance has 2 hazard statements:
- H314: Causes severe skin burns and eye damage
- H410: Very toxic to aquatic life with long lasting effects
What is the melting point of Divosan Extra VT55?
The melting point is Not determined and the boiling point is Not determined.