NextSDS Logo
Safety Data Sheet EN

Divosan Extra VT55

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Divosan Extra VT55

Regulatory Identifiers

CAS Number
N/A
UFI Code
P18J-61RC-N007-4WFY

Identified Uses

Surface disinfectant. for general surface disinfection for food contact surface disinfection For professional and industrial use only.

Uses advised against

Uses other than those identified are not recommended.

Manufacturers & Suppliers

D

Diversey B.V.

manufacturer

De Corridor 4, 3621ZB Breukelen [Maarssenbroeksedijk 2, 3542 DN Utrecht]

030-2476911

Emergency Contacts

NVIC

088 755 8000

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Corr. Cat. 1B H314
Eye Dam. Cat. 1 H318
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS09 - Environmental hazard

GHS09

Hazard Statements

H314 Causes severe skin burns and eye damage.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P280 Wear protective gloves, protective clothing and eye or face protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTRE, doctor or physician.
P501 Dispose of contents and container to a collection point for chemical waste.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
alkyl (C12-16) dimethylbenzyl ammonium chloride EC: 270-325-2 68424-85-1 10 - 20% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTRE, doctor or physician.

Symptoms: Corrosive to the respiratory tract.

Skin contact

Wash skin with plenty of lukewarm, gently flowing water for at least 30 minutes. Wash skin with plenty of lukewarm, gently flowing water. Take off immediately all contaminated clothing and wash it before reuse. Immediately call a POISON CENTRE, doctor or physician. If skin irritation occurs: Get medical advice or attention.

Symptoms: skin irritation

Eye contact

Hold eyelids apart and flush eyes with plenty of lukewarm water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTRE, doctor or physician.

Symptoms: Causes severe or permanent damage.

Ingestion

Rinse mouth. Immediately drink 1 glass of water. Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Keep at rest. Immediately call a POISON CENTRE, doctor or physician.

Symptoms: Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.

Immediate Medical Attention

Immediately call a POISON CENTRE, doctor or physician.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Carbon dioxide. Dry powder. Water spray jet. Fight larger fires with water spray jet or alcohol-resistant foam.

Specific hazards

No special hazards known.

Firefighter Protection

As in any fire, wear self contained breathing apparatus and suitable protective clothing including gloves and eye/face protection.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Large spill

Dyke to collect large liquid spills.

Environmental

Dilute with plenty of water.

Cleanup methods

Absorb with liquid-binding material. Collect in closed and suitable containers for disposal.

Materials: sand, diatomite, universal binders

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. Avoid contact with skin and eyes. Use only with adequate ventilation.

Storage

Store in accordance with local and national regulations. Store in a closed container. Keep only in original packaging. Keep from freezing.

Hygiene

Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not mix with other products unless advised by Diversey. Wash face, hands and any exposed skin thoroughly after handling. Take off immediately all contaminated clothing. Wash contaminated clothing before reuse.

Fire prevention

No special precautions required.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Undiluted: If the product is diluted by using specific dosing systems with no risk of splashes or direct skin contact, the personal protection equipment as described in this section is not required. Diluted: Provide a good standard of general ventilation.

Hands

Undiluted: Chemical-resistant protective gloves (EN 374). Verify instructions regarding permeability and breakthrough time, as provided by the gloves supplier. Consider specific local use conditions, such as risk of splashes, cuts, contact time and temperature. Suggested gloves for prolonged contact: Material: butyl rubber Penetration time: ≥ 480 min Material thickness: ≥ 0.7 mm. Suggested gloves for protection against splashes: Material: nitrile rubber Penetration time: ≥ 30 min Material thickness: ≥ 0.4 mm. In consultation with the supplier of protective gloves a different type providing similar protection may be chosen. Diluted: No special requirements under normal use conditions.

Eyes

Undiluted: Safety glasses or goggles (EN 16321). The use of a full-face shield or other full-face protection is strongly recommended when handling open containers or if splashes may occur. Diluted: No special requirements under normal use conditions.

Respiratory

Undiluted: If exposure to liquid particles or splashes cannot be avoided use: half mask (EN 140) with particle filter P2 (EN 143) or full-face mask (EN 136) with particle filter P1 (EN 143) Consider specific local use conditions. In consultation with the supplier of respiratory protection equipment a different type providing similar protection may be chosen. Diluted: Trigger spray bottle application: No special requirements under normal use conditions. Apply technical measures to comply with the occupational exposure limits, if available.

Skin/Body

Undiluted: Wear chemical-resistant clothing and boots in case direct dermal exposure and/or splashes may occur (EN 14605). Diluted: No special requirements under normal use conditions.

Environmental

Undiluted: Should not reach sewage water or drainage ditch undiluted or unneutralised. Diluted: No special requirements under normal use conditions.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Clear, Colourless
Colour Intensity
---
Form
---
Odor
Characteristic
Odor Threshold
Not applicable
Ph
≈ 7 (neat)
Melting Point
Not determined
Boiling Point
Not determined
Flash Point
Not applicable.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not determined
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
---
Flammability
Not flammable.
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
Not determined
Decomposition Temperature
Not applicable.
Solubility
---
Partition Coefficient
---
Solubility In Water
Fully miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
Not corrosive
Dynamic Viscosity
---
Kinematic Viscosity
Not determined
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal storage and use conditions.

Reactivity

No reactivity hazards known under normal storage and use conditions.

Hazardous reactions

No hazardous reactions known under normal storage and use conditions.

Avoid

None known under normal storage and use conditions.

Incompatible

None known under normal use conditions.

Decomposition

None known under normal storage and use conditions.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.1 Toxicity

No data is available on the mixture. Substance data, where relevant and available, are listed below: ## Aquatic short-term toxicity Aquatic short-term toxicity - fish | Ingredient(s) | Endpoint | Value (mg/l) | Species | Method | Exposure time (h) | | --- | --- | --- | --- | --- | --- |

Aquatic short-term toxicity

alkyl (C12-16) dimethylbenzyl ammonium chloride | LC₅₀ | >0.1-1 | Lepomis macrochirus | OPP 72-1, static (EPA) | 96

12.1 Toxicity

Aquatic short-term toxicity - crustacea | Ingredient(s) | Endpoint | Value (mg/l) | Species | Method | Exposure time (h) | | alkyl (C12-16) dimethylbenzyl ammonium chloride | EC₅₀ | >0.01-0.1 | Daphnia magna Straus | OECD 202 (EU C.2) | 48 |

12.1 Toxicity

Aquatic short-term toxicity - algae | Ingredient(s) | Endpoint | Value (mg/l) | Species | Method | Exposure time (h) | | alkyl (C12-16) dimethylbenzyl ammonium chloride | EC₅₀ | >0.01-0.1 | Pseudokirchneriella subcapitata | OECD 201 (EU C.3) | 72 |

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

Aquatic long-term toxicity Ingredient(s) | Endpoint | Value (mg/l) | Species | Method | Exposure time | Effects observed alkyl (C12-16) dimethylbenzyl ammonium chloride | NOEC | >0.01-0.1 | Daphnia magna | OECD 211 | 21 day(s) | Aquatic toxicity to other aquatic benthic organisms, including sediment-dwelling organisms, if available Ingredient(s) | Endpoint | Value (mg/kg dw sediment) | Species | Method | Exposure time (days) | Effects observed alkyl (C12-16) dimethylbenzyl ammonium chloride | | No data available | | | |

12.2 Persistence and degradability

Abiotic degradation Abiotic degradation - photodegradation in air, if available: Abiotic degradation - hydrolysis, if available: Abiotic degradation - other processes, if available: Biodegradation Ready biodegradability - aerobic conditions Ingredient(s) | Inoculum | Analytical method | DT 50 | Method | Evaluation alkyl (C12-16) dimethylbenzyl ammonium chloride | Activated sludge, aerobe | Oxygen depletion | 63% in 28 day(s) | OECD 301D | Readily biodegradable

12.3 Bioaccumulative potential

Partition coefficient n-octanol/water (log Kow) | Ingredient(s) | Value | Method | Evaluation | Remark | | --- | --- | --- | --- | --- |

12.3 Bioaccumulative potential

| Ingredient(s) | Value | Method | Evaluation | Remark | | alkyl (C12-16) dimethylbenzyl ammonium chloride | < 3 | OECD 107 | No bioaccumulation expected | at 20 °C |

12.3 Bioaccumulative potential

Bioconcentration factor (BCF) | Ingredient(s) | Value | Species | Method | Evaluation | Remark | | --- | --- | --- | --- | --- | --- | | alkyl (C12-16) dimethylbenzyl ammonium chloride | No data available | | | | |

12.4 Mobility in soil

Adsorption/Desorption to soil or sediment | Ingredient(s) | Adsorption coefficient Log Koc | Desorption coefficient Log Koc(des) | Method | Soil/sediment type | Evaluation | | --- | --- | --- | --- | --- | --- | | alkyl (C12-16) dimethylbenzyl ammonium chloride | No data available | | | | |

12.5 Results of PBT and vPvB assessment

Substances that fulfill the criteria for PBT/vPvB, if any, are listed in section 3.

12.6 Endocrine disrupting properties

Endocrine disrupting properties - Environmental effects, if available:

12.7 Other adverse effects

No other adverse effects known.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.

Disposal

The concentrated contents or contaminated packaging should be disposed of by a certified handler or according to the site permit.

Waste Codes

16 03 05° organic wastes containing dangerous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1760
Shipping Name
Corrosive liquid, n.o.s. ( alkyldimethylbenzylammoniumchloride )
Transport Class
8
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

General assessment method

Chemical Safety Assessment Not performed

substances identified as having endocrine disrupting properties in accordance with the criteria set out in Delegated Regulation (EU) 2017/2100 or Regulation (EU) 2018/605

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Divosan Extra VT55?

The signal word is danger.

What is the physical form of Divosan Extra VT55?

Divosan Extra VT55 is a liquid with clear, colourless color. It has characteristic odor.

What is Divosan Extra VT55 used for?

Surface disinfectant. for general surface disinfection for food contact surface disinfection For professional and industrial use only.

What are the hazard statements for Divosan Extra VT55?

This substance has 2 hazard statements:

  • H314: Causes severe skin burns and eye damage.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of Divosan Extra VT55?

The melting point is Not determined and the boiling point is Not determined.