Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
neodisher LaboClean A 8 commonly used pc35 washing and cleaning products (including solvent based products).
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS05
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
- H335: May cause respiratory irritation.
- H411: Toxic to aquatic life with long lasting effects.
Precautionary Statements
- P260: Do not breathe dust/fume/gas/mist/vapours/spray.
- P273: Avoid release to the environment.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
- P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310: Immediately call a POISON CENTER or doctor.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Chemische Fabrik Dr. Weigert GmbH & Co. KG
manufacturer
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
112
DE
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixturesChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| disodium metasilicate pentahydrate EC: 229-912-9 | 10213-79-3 | 10-25% | ⚠️ Hazardous |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 10-25% | ⚠️ Hazardous |
| Sodium carbonate EC: 207-838-8 | 497-19-8 | 1-10% | ⚠️ Hazardous |
| troclosene sodium EC: 220-767-7 | 2893-78-9 | 1-5% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Ensure supply of fresh air. When dust is intensively inhaled, seek medical help immediately.
🖐️ Skin Contact
Wash off immediately with soap and water. Take medical treatment.
👁️ Eye Contact
Separate eyelids, wash the eyes thoroughly with water (15 min.). Summon a doctor immediately.
🍽️ Ingestion/Swallowing
If swallowed, seek medical advice immediately and show this container or label. Rinse mouth thoroughly with water. Let plenty of water be drunk in small gulps. Do not induce vomiting.
🚨 Immediate Medical Attention Required
Immediate medical attention is required for intensive inhalation, eye contact, and ingestion. In the case of swallowing with subsequent vomiting, aspiration of the lungs can occur which can lead to chemical pneumonia or asphyxiation.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🧤 Hand Protection
Chemical resistant gloves. Use Permanent hand contact: Appropriate Material neoprene, Material thickness >= 0,65 mm, Breakthrough time - 480 min. Appropriate Material butyl, Material thickness >= 0,7 mm, Breakthrough time - 480 min. Appropriate Material nitrile, Material thickness >= 0,4 mm, Breakthrough time - 480 min. Use Short-term hand contact: Appropriate Material nitrile, Material thickness >= 0,11 mm. Hand protection must comply with EN 374.
👁️ Eye Protection
Safety glasses with side protection shield; Eye protection must comply with EN 166.
😷 Respiratory Protection
Use breathing apparatus in dust-laden atmosphere. Particle filter P2
🦺 Skin/Body Protection
Clothing as usual in the chemical industry.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1759
📦 Proper Shipping Name
CORROSIVE SOLID, N.O.S. (sodium hydroxide, troclosene sodium)
⚠️ Transport Hazard Class
8
📋 Packing Group
II
🚛 ADR Transport Precautions
See Sections 6 to 8
🚢 IMDG Maritime Transport Precautions
See Sections 6 to 8
✈️ IATA Air Transport Precautions
See Sections 6 to 8
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for neodisher LaboClean A 8?
The signal word for this substance is "danger".
What is the physical form of neodisher LaboClean A 8?
neodisher LaboClean A 8 is a solid with white color. It has characteristic odor.
What is the solubility of neodisher LaboClean A 8?
not determined
What is neodisher LaboClean A 8 used for?
PC35 Washing and cleaning products (including solvent based products)
What are the hazard statements for neodisher LaboClean A 8?
This substance has 4 hazard statements: H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H335: May cause respiratory irritation. H411: Toxic to aquatic life with long lasting effects.
What is the melting point of neodisher LaboClean A 8?
The melting point is not determined and the boiling point is not determined.