Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Electrode Cleaning Solution for General Use
- Product Code
- HI7061
- Chemical Name
- HYDROCHLORIC ACID 0.034%
- Synonyms
- HYDROCHLORIC ACID 0.034%
Regulatory Identifiers
- CAS Number
- 7647-01-0 Check regulations →
- EC Number
- 231-595-7 Check regulations →
- REACH No.
- 01-2119484862-26
Identified Uses
Cleaning Solution for Electrodes.
Manufacturers & Suppliers
Hanna Instruments S.R.L.
manufacturer
str. Hanna Nr 1, 457260 loc. Nusfalau (Salaj), Romania
+40 260607700
Hanna Instruments, Inc
distributor
584 Park East Drive, Woonsocket, Rhode Island, USA 02895
+1 8004266287
Emergency Contacts
CHEMTREC
+1 8004249300
24 hours/365 days
CHEMTREC
+1 7035273887
24 hours/365 days
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The product does not contain substances classified as being hazardous to human health or the environment pursuant to the provisions set forth in OSHA Hazard Communication Standard (HCS) (29 CFR 1910.1200).
First Aid Measures
Emergency procedures for chemical exposure incidents
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
carbon dioxide, foam, powder and water spray.
None in particular.
Do not breathe combustion products.
Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.
Firefighter Protection
Always wear full fire prevention gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use breathing equipment if fumes or powders are released into the air. These indications apply for both processing staff and those involved in emergency procedures.
The product must not penetrate into the sewer system or come into contact with surface water or ground water.
Collect as much material as possible and eliminate the rest using jets of water.
Related Products
Similar products with comparable safety profiles
Electronic Cleaning Solvent
---
Reference Electrode Filling Solution
---
Electronic Cleaning Solvent Plus
---
pH Electrode Storage Reagent
---
Battery Electrolyte
---
Storage Solution for pH and ORP Electrodes
---
SODIUM HYDROXIDE SOLUTION 50% SUITABLE FOR CLEANING IN PLACE
---
Electrolyt E1
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Before handling the product, consult all the other sections of this material safety data sheet. Do not eat, drink or smoke during use.
Keep the product in clearly labelled containers.
Do not eat, drink or smoke during use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None required.
None required.
If the threshold value (e.g. TLV-TWA) is exceeded for the substance or one of the substances present in the product, wear a mask with a NIOSH certified filter, whose class must be chosen according to the limit of use concentration (NIOSH 42 CFR 84, OSHA 29 CFR 1910.134). In the presence of gases or vapours of various kinds and/or gases or vapours containing particulate (aerosol sprays, fumes, mists, etc.) combined filters are required. Respiratory protection devices must be used if the technical measures adopted are not suitable for restricting the worker's exposure to the threshold values considered. The protection provided by masks is in any case limited. If the substance considered is odourless or its olfactory threshold is higher than the corresponding TLV-TWA and in the case of an emergency, wear open-circuit compressed air breathing apparatus or external air-intake breathing apparatus. For a correct choice of respiratory protection device, see standard NIOSH 42 CFR 84, OSHA 29 CFR 1910.134.
None required.
The emissions generated by manufacturing processes, including those generated by ventilation equipment, should be checked to ensure compliance with environmental standards.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable in normal conditions of use and storage.
There are no particular risks of reaction with other substances in normal conditions of use.
No hazardous reactions are foreseeable in normal conditions of use and storage.
None in particular. However the usual precautions used for chemical products should be respected.
Information not available
Information not available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal must be performed through an authorised waste management firm, in compliance with national and local regulations.
Reuse, when possible.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not applicable
- Shipping Name
- not applicable
- Transport Class
- not applicable
- Packing Group
- not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Electrode Cleaning Solution for General Use known by?
Electrode Cleaning Solution for General Use is also known as: HYDROCHLORIC ACID 0.034%
What is the hazard signal word for Electrode Cleaning Solution for General Use?
The signal word is no signal word.
What is the physical form of Electrode Cleaning Solution for General Use?
Electrode Cleaning Solution for General Use is a liquid appearing as liquid with colourless color. It has odourless odor.
What is the solubility of Electrode Cleaning Solution for General Use?
soluble in water
What is Electrode Cleaning Solution for General Use used for?
Cleaning Solution for Electrodes.
What is the melting point of Electrode Cleaning Solution for General Use?
The melting point is not available and the boiling point is not available.