Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TANEX POWER 10X750 ML D/F/I/NL
- Product Code
- 61275, 64697
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent
Manufacturers & Suppliers
Tana Chemie GmbH
Rheinallee 96 55120 Mainz
+49613196403
Emergency Contacts
Emergency Contact
112
Emergency Contact
+49(0)6131-19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Aqueous surfactant solution.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A | --- | 5 - 10% | Yes |
| N/A | --- | 2 - 5% | Yes |
| N/A | --- | 1 - 2% | Yes |
| N/A | --- | 1 - 2% | Yes |
| N/A | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. If symptoms persist, call a physician.
Protect unharmed eye. If easy to do, remove contact lens, if worn. Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. If eye irritation persists, consult a specialist.
Clean mouth with water and drink afterwards plenty of water. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. Obtain medical attention.
Immediate Medical Attention
Obtain medical attention. If symptoms persist, call a physician or consult a specialist. For specialist advice physicians should contact the Poisons Information Service.
Medical Treatment
For specialist advice physicians should contact the Poisons Information Service.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
For prolonged or repeated contact use protective gloves. It is suggested the usage of chemical resistant gloves made of butyl rubber or nitrile rubber category III according to EN 374-1: 2003 (0,4 mm). As alternative, a different type of gloves might be used if, accordingly to the recommendations of the producer, guarantee the same level of protection. Remarks : Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact).
If splashes are likely to occur, wear: Tightly fitting safety goggles
Not required; except in case of aerosol formation. Recommended Filter type: ABEK-P3-filter
not required under normal use
Try to prevent the material from entering drains or water courses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TANEX POWER 10X750 ML D/F/I/NL?
The signal word is warning.
What is the physical form of TANEX POWER 10X750 ML D/F/I/NL?
TANEX POWER 10X750 ML D/F/I/NL is a liquid appearing as liquid with greenish-blue color. It has characteristic odor.
What is TANEX POWER 10X750 ML D/F/I/NL used for?
Cleaning agent
What are the hazard statements for TANEX POWER 10X750 ML D/F/I/NL?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of TANEX POWER 10X750 ML D/F/I/NL?
The melting point is No data available and the boiling point is No information available..