Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- InoTec Pickling Paste RS
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Metal surface treatment products
Manufacturers & Suppliers
Caree Chemie GmbH
manufacturer
Hüttenstr. 31, D-52355 Düren
+49 (0) 2421/22593-50
http://www.caree-chemie.de
Emergency Contacts
Emergency Contact
+49 (0) 761/19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS06
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If breathing is irregular or stopped, administer artificial respiration. No mouth-to-mouth or mouth-to-nose resuscitation. Use Ambu bag or ventilator. Call a physician immediately. After inspiration of steam or aerosol consult a physician immediately. Bring patient to fresh air. Give patient calcium tablets and keep him calm. Let inhale oxygen in case of breathlessness.
Symptoms: Breathlessness, bronchitis
Call a physician immediately. Instant medical treatment essential. Flush with water, afterwards apply Ca-gluconate gel and massage it into skin. Larger injuries (> 150 cm2) require additional donation of 6 calcium tablets (400 mg each), solved in water. Repeat procedure every 2 hrs before reaching the hospital. Take off immediately all contaminated clothing and wash it before reuse.
Symptoms: Burns, badly healing wounds (if untreated)
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist.
Symptoms: Danger of blindness
Rinse mouth immediately and drink plenty of water. Do NOT induce vomiting. Call a physician immediately.
Symptoms: Gastric perforation, bloody vomiting
Immediate Medical Attention
Call a physician immediately. Instant medical treatment essential for skin contact. Suspicion of poisoning demands medical survey. Symptoms may arise up to 48 h after contact, requiring medical survey. Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
If handled uncovered, arrangements with local exhaust ventilation have to be used. Do not breathe gas/fumes/vapour/spray.
Suitable material: PVC (polyvinyl chloride), Thickness of the glove material = 1,2 mm, Permeation time (maximum wear time) > 480 min Tested protective gloves must be worn, EN ISO 374 When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Suitable eye protection: goggles, Eye glasses with side protection (DIN EN 166).
In case of inadequate ventilation wear respiratory protection. Filtering device (full mask or mouthpiece) with filter: blue EN 148-1
Wear suitable protective clothing. DIN EN 14605
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 2922
- Shipping Name
- CORROSIVE LIQUID, TOXIC, N.O.S. (Nitric acid, Hydrofluoric acid)
- Transport Class
- 8
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for InoTec Pickling Paste RS?
The signal word is danger.
What is the physical form of InoTec Pickling Paste RS?
InoTec Pickling Paste RS is a paste with colourless color. It has stinging odor.
What is the solubility of InoTec Pickling Paste RS?
easily soluble
What is InoTec Pickling Paste RS used for?
Metal surface treatment products
What are the hazard statements for InoTec Pickling Paste RS?
This substance has 4 hazard statements:
- H290: May be corrosive to metals.
- H301 + H331: Toxic if swallowed or if inhaled.
- H310: Fatal in contact with skin.
- H314: Causes severe skin burns and eye damage.
What is the melting point of InoTec Pickling Paste RS?
The melting point is not determined and the boiling point is not determined.