NextSDS Logo
Safety Data Sheet EN

Avesta BlueOne™ Pickling Paste 130

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Avesta BlueOne™ Pickling Paste 130
Synonyms
Avesta BlueOne™ Pickling Gel 130

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Pickling/cleaning of stainless steel

Uses advised against

Other metals than stainless steel

Manufacturers & Suppliers

B

Böhler Welding Group Nordic AB

manufacturer

Lodgatan 14, 211 24 MALMÖ, Sweden

+46 (0)40 288 300

Emergency Contacts

Emergency Contact

+46-8-331 231

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified na: r-phrases

Hazard Classifications

Toxic by inhalation, contact with skin and if swallowed
It causes severe burns

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Chemical identity: Strong acid paste/solution with corrosive properties.

Chemical Name CAS Number Concentration Hazardous
Nitric acid, HNO₃ EC: 231-714-2 7697-37-2 15 - 25% Yes
Hydrofluoric acid, HF EC: 231-634-8 7664-39-3 2 - 6% Yes

Additional information Classification according to directive 67/548/EEC. Symbols and risk phrases are for concentrated substances.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Keep victim lying down, quiet and warm. Rinse nose and mouth with water. Might require assistance with breathing. Seek medical care even if only slight discomfort occurs.

Symptoms: Pain in the mouth, throat and breast may occur at inhalation. Salivation and easier dysphonia and discomfort feeling in the breast.

Skin contact

Alternative A - Rinse immediately with plenty of water, then treat with 2.5% Calcium Gluconate gel, follow the instructions on the packaging. If not available, see alt. B. Alternative B - Rinse immediately with Avesta First Aid Spray 910. Spray liberally onto the affected area, always using the complete content. Avoid rinsing with water first, as it reduces the effect of the solution. After alternative A and B seek medical help.

Eye contact

Protect intact eye. Rinse immediately with plenty of water for at least 15 minutes and seek immediate medical care (eye specialist).

Ingestion

If victim is conscious and alert give milk or water to drink. Thereafter 20 lime tablets dissolved in 2 L of water. Do not induce vomiting. Seek medical care.

Immediate Medical Attention

Seek medical care even if only slight discomfort occurs (inhalation). Seek medical care (ingestion). Seek medical help (skin). Seek immediate medical care (eye specialist).

Medical Treatment

Inform the doctor that the injury has been caused by contact with hydrofluoric, sulphuric and nitric acid mixtures.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

water

Specific hazards

The Pickling Fluid will emit toxic fumes and nitrous fumes when exposed to heat/fire.

Instructions

Bottles close to fire should be removed or cooled with water.

Firefighter Protection

Appropriate protective acid-resistant clothing should be used. Gas mask with filter of chlorine type B (grey) and dust filter P2, according to CEN (Central European Norms).

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid direct contact. If there is still a risk of direct contact or stench protect with some form of acid-resistant material.

Environmental

Prevent spillage from entering sewage or public waters or nature.

Cleanup methods

Neutralise with Avesta Neutralising Agent or a strong alkaline compound i.e. slaked lime. Arrange for pick up. Rinse with plenty of water.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid fume generation and accumulation by using in a well-ventilated area. Use in areas having local exhaust and general ventilation.

Storage

Keep containers securely closed when not in use and in an upright position. Store in areas where temperature remains between 0-30 °C at all times.

Hygiene

Avesta First Aid Spray 910 for both eyes and skin, should be available at the premises. Emergency eyewash and safety shower must be available at the working place.

Fire prevention

Bottles close to fire should be removed or cooled with water.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Acid resistant rubber gloves.

Eyes

Face shield.

Respiratory

Gas mask with a filter of the chlorine type B (grey) and dust filter P2

Skin/Body

Rubber boots and acid resistant clothes, which covers all body parts exposed to splashes.

Environmental

See section 6 and 7.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Solidification Point
---
Softening Point
---
Explosive Limits
---
Voc Content
---
Auto Ignition Temperature
---
Boiling Point
80-100°C
Colour Intensity
---
Relative Evaporation Rate
---
Vapor Pressure
< 0.01 kPa
Kinematic Viscosity
---
Molecular Weight
---
Properties Status
---
Crystallisation Point
---
Appearance
Blue paste/gel with a minor pungent smell.
Relative Density
---
Metal Corrosion
---
Flammability
---
Density
1.2-1.3 g/cm³ at 20°C
Freezing Point
---
Solubility In Fat
---
Odor
minor pungent smell
Flash Point
Not applicable
Physical State Data
liquid
Melting Point
40°C
Ph
0 at 20°C
Bulk Density
---
Form
paste/gel
Colour
Blue
Solubility In Water
90 weight %
Physical State
Blue paste/gel
Evaporation Rate
---
Lower Explosive Limit
---
Cloud Point
---
Vapor Density
---
Dynamic Viscosity
---
Partition Coefficient
---
State Under Standard Conditions
---
Solubility
---
Upper Explosive Limit
---
Decomposition Temperature
---
Odor Threshold
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Reacts vigorously with base metals and alkaline substances

Hazardous reactions

Polymerization will not occur

Avoid

Avoid high temperatures, must not be exposed to direct sunshine.

Incompatible

low alloyed metals and alkaline compounds

Decomposition

When heated, nitrous gases will be developed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
2922
Shipping Name
CORROSIVE LIQUID, TOXIC, N.O.S. (hydrofluoric acid, nitric acid)
Transport Class
8 (6.1)
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Avesta BlueOne™ Pickling Paste 130 known by?

Avesta BlueOne™ Pickling Paste 130 is also known as: Avesta BlueOne™ Pickling Gel 130

What is the hazard signal word for Avesta BlueOne™ Pickling Paste 130?

The signal word is na: r-phrases.

What is the physical form of Avesta BlueOne™ Pickling Paste 130?

Avesta BlueOne™ Pickling Paste 130 is a blue paste/gel appearing as blue paste/gel with a minor pungent smell. with blue color. It has minor pungent smell odor.

What is Avesta BlueOne™ Pickling Paste 130 used for?

Pickling/cleaning of stainless steel

What is the melting point of Avesta BlueOne™ Pickling Paste 130?

The melting point is 40°C and the boiling point is 80-100°C.