Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GRF CLEANER PVC TI 1L*6 L58
Regulatory Identifiers
- CAS Number
- 78-93-3 Check regulations →
- EC Number
- 201-159-0 Check regulations →
- REACH No.
- 01-2119457290-43
Identified Uses
Cleaning agent/ Cleaner
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
Bison International
manufacturer
Dr.A.F.Philipsstraat 9, NL-4462 EW Goes, PO Box 160, NL-4460 AD Goes
+31 88 3235700
Emergency Contacts
Emergency Contact
+31 88 3235700
mo-fr 08:00h-17:00h (CET)
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| butanone EC: 201-159-0 | 78-93-3 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints. No special measures required.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L058
CAS: 78-93-3
PVC cleaner R
---
PVC cleaner R
---
GRF PE CLNR HEAVY DUTY BO 1L*12 L105
---
GRF LUBRICANT JR 700G*12 L49
CAS: 8009-03-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see item 7.
Solvent resistant gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Recommended thickness of the material: > 0,12 mm. Butyl rubber, BR. Nitrile rubber, NBR. Recommended thickness of the material: > 0,7 mm. For the mixture of chemicals mentioned below the penetration time has to be at least 10 minutes (Permeation according to EN 374 Part 3: Level 1). For the mixture of chemicals mentioned below the penetration time has to be at least 120 minutes (Permeation according to EN 374 Part 3: Level 4).
Tightly sealed goggles. Goggles recommended during refilling.
Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Filter A.
Solvent resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1193
- Shipping Name
- ETHYL METHYL KETONE (METHYL ETHYL KETONE)
- Transport Class
- 3 Flammable liquids.
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GRF CLEANER PVC TI 1L*6 L58?
The signal word is danger.
What is the physical form of GRF CLEANER PVC TI 1L*6 L58?
GRF CLEANER PVC TI 1L*6 L58 is a fluid with colourless color. It has like ketone odor.
What is GRF CLEANER PVC TI 1L*6 L58 used for?
Cleaning agent/ Cleaner
What are the hazard statements for GRF CLEANER PVC TI 1L*6 L58?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of GRF CLEANER PVC TI 1L*6 L58?
The melting point is -86.3 C and the boiling point is 79-80.5 C.