Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- neodisher MediClean forte
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
PC35 Washing and cleaning products (including solvent based products)
Manufacturers & Suppliers
Chemische Fabrik Dr. Weigert GmbH & Co. KG
manufacturer
Mühlenhagen 85, D-20539 Hamburg
+49 40 789 60 0
http://www.drweigert.com
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| fatty alcohols, alkoxylated | 120313-48-6 | 0.1 - 1% | Yes |
| 2,2',2''-nitrilotriethanol EC: 203-049-8 | 102-71-6 | 10 - 25% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. In the event of symptoms take medical treatment.
In case of contact with skin wash off with warm water. Consult a doctor if skin irritation persists.
Separate eyelids, wash the eyes thoroughly with water (15 min.). In case of irritation consult an oculist.
Rinse out mouth and give plenty of water to drink.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product itself is non-combustible; adapt fire extinguishing measures to surrounding areas.
In case of combustion evolution of dangerous gases possible.
Firefighter Protection
In case of combustion use a suitable breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin, eyes and clothing.
Do not discharge into surface waters/groundwater.
Clean contaminated floors and objects thoroughly, observing environmental regulations.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Protect from heat and direct sunlight. Keep container tightly closed and dry. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical resistant gloves Use: Permanent hand contact Appropriate Material: neoprene Material thickness: >= 0,65 mm Breakthrough time: > 480 min Appropriate Material: nitrile Material thickness: >= 0,4 mm Breakthrough time: > 480 min Appropriate Material: butyl Material thickness: >= 0,7 mm Breakthrough time: > 480 min Use: Short-term hand contact Appropriate Material: nitrile Material thickness: >= 0,11 mm Hand protection must comply with EN ISO 374.
Safety glasses with side protection shield; Eye protection must comply with EN 166.
Not necessary, but do not inhale vapours. If workplace limits are exceeded, a respiratory protection approved for this particular job must be worn. Particle filter P2
Not necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No hazardous reactions known.
No hazardous reactions when stored and handled according to prescribed instructions.
No hazardous reactions known.
No hazardous reactions known.
None known
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for neodisher MediClean forte?
The signal word is no signal word.
What is the physical form of neodisher MediClean forte?
neodisher MediClean forte is a liquid with yellowish to brownish, clear color. It has characteristic odor.
What is the solubility of neodisher MediClean forte?
Remarks not determined
What is neodisher MediClean forte used for?
PC35 Washing and cleaning products (including solvent based products)
What is the melting point of neodisher MediClean forte?
The melting point is Remarks not determined and the boiling point is Remarks not determined.