NextSDS Logo
Safety Data Sheet EN

Blattglanz Rezeptur 2007 o. Duft

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Blattglanz Rezeptur 2007 o. Duft
Product Code
H1000115802000

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Care product

Manufacturers & Suppliers

f

fleur ami GmbH

manufacturer

Hhenhfe 6 47918 Tnisvorst

+49 (0) 21 51/935 21-0

Emergency Contacts

Poison Control Center, Mainz

+49 (0) 61 31/19 24 0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 3 H226
Asp. Tox. Cat. 1 H304
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H226 Flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways
H319 Causes serious eye irritation.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P243 Take precautionary measures against static discharge.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P303+P361+P353 IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P331 Do NOT induce vomiting.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Mixture of the substances listed below with harmless additions.

Chemical Name CAS Number Concentration Hazardous
Hydrocarbons, C4, 1.3-Butadiene-free, polymd., Triisobutylene Fraction, hydrogenated EC: 297-629-8 93685-81-5 50 - 100% Yes
White mineral oil, petroleum EC: 232-315-6 8042-47-5 25 - 50% Yes
ISOPROPANOL EC: 200-661-7 67-63-0 10 - 25% Yes
Hydrocarbons, C10-12, Isoalkanes, <2% Aromatics EC: 923-037-2 64741-65-7 2.5 - 10% Yes

For the wording of the listed risk phrases refer to section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness bring patient into stable side position for transport.

Skin contact

Wash skin with water using soap if available. If persistant irritation occurs, obtain medical attention.

Symptoms: persistant irritation

Eye contact

Rinse immediately opened eye for several minutes under running water. Then consult doctor

Ingestion

Do not induce vomiting. Give nothing by mouth. Obtain medical attention immediately. If vomiting occurs spontaneously, keep head below hips to prevent aspiration.

Symptoms: vomiting occurs spontaneously

Medical Treatment

Cleaning of the stomach should only be carried out with endotracheal intubation. Danger of aspiration. Renew lipid coating of the skin in order to protect against dermatitis. Symptomatic treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Room ventilation i.e. vacuum suction. Measures to be taken against electro-static sparks

Hands

Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.

Eyes

Tightly sealed safety glasses.

Respiratory

Not necessary if room is well-ventilated.

Skin/Body

Standard proctective clothing. Chemical resistant safety-shoes or boots. If skin contact is possible, wear inpenetrable protective clothing against this solvent.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Softening Point
---
Freezing Point
---
Density
ca. 0,85 g/cm.
Flammability
Not applicable
Solubility
---
Solubility In Fat
---
Kinematic Viscosity
Not determined
Dynamic Viscosity
Not determined
Solubility In Water
Not miscible or difficult to mix
Ph
not applicable
Appearance
Fluid
Boiling Point
82 C
Cloud Point
---
Decomposition Temperature
Not determined
State Under Standard Conditions
---
Voc Content
---
Bulk Density
---
Auto Ignition Temperature
425 C
Upper Explosive Limit
12.0 Vol %
Partition Coefficient
Not determined
Physical State Data
liquid
Relative Evaporation Rate
---
Evaporation Rate
Not determined
Molecular Weight
---
Form
Fluid
Lower Explosive Limit
2.0 Vol %
Melting Point
Not determined
Solidification Point
---
Physical State
Fluid
Crystallisation Point
---
Colour
Colourless
Explosive Limits
---
Odor Threshold
Not determined
Vapor Density
Not determined
Odor
Characteristic
Metal Corrosion
---
Properties Status
---
Vapor Pressure
48 hPa
Colour Intensity
---
Relative Density
Not determined
Flash Point
30 C
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1993
Shipping Name
FLAMMABLE LIQUID, N.O.S. (ISOPROPANOL (ISOPROPYL ALCOHOL))
Transport Class
3
Packing Group
III
ADR

Warning: Flammable liquids.

IMDG

Warning: Flammable liquids.

IATA

Warning: Flammable liquids.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Blattglanz Rezeptur 2007 o. Duft?

The signal word is danger.

What is the physical form of Blattglanz Rezeptur 2007 o. Duft?

Blattglanz Rezeptur 2007 o. Duft is a fluid appearing as fluid with colourless color. It has characteristic odor.

What is Blattglanz Rezeptur 2007 o. Duft used for?

Care product

What are the hazard statements for Blattglanz Rezeptur 2007 o. Duft?

This substance has 3 hazard statements:

  • H226: Flammable liquid and vapour.
  • H304: May be fatal if swallowed and enters airways
  • H319: Causes serious eye irritation.

What is the melting point of Blattglanz Rezeptur 2007 o. Duft?

The melting point is Not determined and the boiling point is 82 C.

Compliance Scanner

Scan your compliance