Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Colour spray E-OLL - brillant / silk matt / matt
- Product Code
- 600319
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- KNJ2-FCYF-W80E-3Y82
Identified Uses
Colour spray
Manufacturers & Suppliers
E/D/E - Einkaufsbuero Deutscher Eisenhaendler GmbH
manufacturer
EDE Platz 1, D-42389 Wuppertal, Germany
+49 202 6096-0
Emergency Contacts
Poison Control Center Mainz
+49 (0) 6131/19240
24 hour emergency service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-butyl acetate EC: 204-658-1 | 123-86-4 | 25 - 50% | Yes |
| butane, pure EC: 203-448-7 | 106-97-8 | 10 - 25% | Yes |
| acetone EC: 200-578-6 | 67-64-1 | 10 - 25% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 2.5 - 10% | Yes |
| ethyl acetate EC: 205-500-4 | 141-78-6 | 2.5 - 10% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. Seek medical treatment in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Rinse out mouth and then drink plenty of water.
Immediate Medical Attention
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
Can form explosive gas-air mixtures.
Cool endangered receptacles with water spray.
Firefighter Protection
Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
No special measures required.
Related Products
Similar products with comparable safety profiles
DUPLI-COLOR Color Spray Quality Paint (silk mat)
---
DUPLI-COLOR Color Spray Quality Paint (glossy)
---
MOTIP Rallye Spray glänzend, matt, seidenmatt various colours
---
DUPLI-COLOR Sprayplast different colours 400ml
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni glanz, diff colors
---
Aerosol NC Industrielack uni mattiert, diff colors
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Open and handle receptacle with care. Use only in well ventilated areas.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. Material of gloves: Butyl rubber, BR. Recommended thickness of the material: ≥ 0.4 mm. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not necessary if room is well-ventilated. Use suitable respiratory protective device in case of insufficient ventilation. Self-contained respiratory protective device.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Colour spray E-OLL - brillant / silk matt / matt?
The signal word is danger.
What is the physical form of Colour spray E-OLL - brillant / silk matt / matt?
Colour spray E-OLL - brillant / silk matt / matt is a aerosol with different according to colouring color. It has characteristic odor.
What is Colour spray E-OLL - brillant / silk matt / matt used for?
Colour spray
What are the hazard statements for Colour spray E-OLL - brillant / silk matt / matt?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of Colour spray E-OLL - brillant / silk matt / matt?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..