Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MILIZID
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent, acidic. Reserved for industrial and professional use.
Uses advised against
No information available.
Manufacturers & Suppliers
DR.SCHNELL GmbH & Co. KGaA
manufacturer
Taunusstraße 19, D-80807 München
+49/89/350608-0
http://www.dr-schnell.de
Emergency Contacts
GBK GmbH
+49 (0) 61 32 - 8 44 63
24-Hour-Number
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
< 5 % non-ionic surfactants, perfumes.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| sulfamic acid EC: 226-218-8 | 5329-14-6 | 5 - 20% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move victim out of danger zone. Provide fresh air. In all cases of doubt, or when symptoms persist, seek medical advice. To be accompanied by MSDS.
If skin irritation occurs: Get medical advice/attention. After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water.
Symptoms: If skin irritation occurs: Irritating to skin.
Rinse immediately carefully and thoroughly with eye-bath or water. Remove contact lenses, if present and easy to do. Continue rinsing. In all cases of doubt, or when symptoms persist, seek medical advice. To be accompanied by MSDS.
Symptoms: Irritating to eyes.
Rinse mouth immediately and drink plenty of water.
Immediate Medical Attention
Treat symptomatically. No special measures are necessary.
Medical Treatment
Treat symptomatically. No special measures are necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation. This can be achieved by local exhaust ventilation or general ventilation. When exceeding the occupational exposure limit (OEL): Use appropriate respiratory protection. Applies only if maximum permissible exposure values are listed here.
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Recommendation: On short hand contact: rubber gloves. (EN 374) No tests have been carried out.
Suitable eye protection: Tightly sealed safety glasses. (EN166)
With correct and proper use, and under normal conditions, breathing protection is not required.
Wear suitable protective clothing.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- not applicable
- Shipping Name
- not applicable
- Packing Group
- not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MILIZID?
The signal word is warning.
What is the physical form of MILIZID?
MILIZID is a liquid with green color.
What is the solubility of MILIZID?
not determined
What is MILIZID used for?
Cleaning agent, acidic. Reserved for industrial and professional use.
What are the hazard statements for MILIZID?
This substance has 2 hazard statements:
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
What is the melting point of MILIZID?
The melting point is not determined and the boiling point is 100 C.