Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ZETOLAN-MEK 3.
- Product Code
- 516
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 8H9P-HREY-ATG0-ARUX
Identified Uses
manufacturing aids
Manufacturers & Suppliers
Leyco Chemische Leyde GmbH
manufacturer
Industriestraße 155, D-50999 Köln
+49 (0) 2236-966-00-0
http://www.leyde.com
Emergency Contacts
Emergency Contact
0049 (0) 2236 966 00 29
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| DISTILLATES (FISCHER-TROPSCH), HEAVY, C18-50 - BRANCHED, CYCLIC AND LINEAR EC: 482-220-0 | 848301-69-9 | 50% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Remove contaminated, saturated clothing. Wash off with soap and water.
Rinse immediately with plenty of water, also under the eyelids. If symptoms persist, call a physician.
Do not induce vomiting. If symptoms persist, call a physician.
Immediate Medical Attention
If coughing, difficult breathing or other symptoms of poisoning occur, even after several hours, call a physician immediately.
Medical Treatment
Aspiration may cause pulmonary oedema and pneumonitis.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use dry chemical, CO2, water spray or "alcohol" foam.
Do not use a solid water stream as it may scatter and spread fire.
Incomplete combustion may produce small amounts of Carbon monoxide
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes.
Do not flush into surface water or sanitary sewer system.
Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust).
Materials: sand, diatomaceous earth, acid- or universal binding agents, silica gel, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Do not breathe vapours or spray mist.
Keep tightly closed. Keep containers dry and tightly closed to avoid moisture absorption and contamination.
When using do not eat or drink.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special technical protective measures required.
Wear suitable gloves and eye/face protection. protective gloves nitrile rubber, Neoprene gloves
Wear suitable gloves and eye/face protection. EN166
Avoid formation of aerosol.
Wear face-shield and protective suit for abnormal processing problems.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Stable
None known.
extreme temperatures
strong oxidising agents
Thermal decomposition can lead to release of irritating gases and vapours. Carbon monoxide, carbon dioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ZETOLAN-MEK 3.?
The signal word is danger.
What is the physical form of ZETOLAN-MEK 3.?
ZETOLAN-MEK 3. is a liquid with light yellow color. It has mild odor.
What is ZETOLAN-MEK 3. used for?
manufacturing aids
What are the hazard statements for ZETOLAN-MEK 3.?
This substance has 1 hazard statement:
- H304: May be fatal if swallowed and enters airways.
What is the melting point of ZETOLAN-MEK 3.?
The melting point is < 0 °C and the boiling point is > 280 °C.