MOLYKOTE® CU-7439 Plus Paste V1

Move person to fresh air; if effects occur, consult a physician.

Remove material from skin immediately by washing with soap and plenty of water. Remove contaminated clothing and shoes while washing. Seek medical attention if irritation persists. Wash clothing before reuse. Discard items which cannot be decontaminated, including leather articles such as shoes, belts and watchbands.

Immediately flush eyes with water; remove contact lenses, if present, after the first 5 minutes, then continue flushing eyes for at least 15 minutes. Obtain medical attention without delay, preferably from an ophthalmologist.

If swallowed, seek medical attention. Do not induce vomiting unless directed to do so by medical personnel.

Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical

None known.

Exposure to combustion products may be a hazard to health.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.

Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations.

Wipe up or scrape up and contain for salvage or disposal.

For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, Sections 13 and 15 of this SDS provide information regarding certain local or national requirements.

Do not release the product to the aquatic environment above defined regulatory levels. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Local authorities should be advised if significant spillages cannot be contained.

Wipe up or scrape up and contain for salvage or disposal.

Do not get on skin or clothing. Do not swallow. Do not get in eyes. Take care to prevent spills, waste and minimize release to the environment. Handle in accordance with good industrial hygiene and safety practice.

Keep in properly labelled containers. Store in accordance with the particular national regulations.

Handle in accordance with good industrial hygiene and safety practice.

Use local exhaust ventilation, or other engineering controls to maintain airborne levels below exposure limit requirements or guidelines. If there are no applicable exposure limit requirements or guidelines, general ventilation should be sufficient for most operations. Local exhaust ventilation may be necessary for some operations.

Use gloves chemically resistant to this material when prolonged or frequently repeated contact could occur. NOTICE: The selection of a specific glove for a particular application and duration of use in a workplace should also take into account all relevant workplace factors such as, but not limited to: Other chemicals which may be handled, physical requirements (cut/puncture protection, dexterity, thermal protection), potential body reactions to glove materials, as well as the instructions/specifications provided by the glove supplier.

Use chemical goggles. If exposure causes eye discomfort, use a full-face respirator.

Respiratory protection should be worn when there is a potential to exceed the exposure limit requirements or guidelines.

Wear clean, body-covering clothing.

Stable under normal conditions.

Not classified as a reactivity hazard.

Can react with strong oxidizing agents.

None known.

Oxidizing agents

1-Butene.

Recycler, Reclaimer, Incinerator or other thermal destruction device.

For unused & uncontaminated product, the preferred options include sending to a licensed, permitted: Recycler, Reclaimer, Incinerator or other thermal destruction device.