Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOLYKOTE(R) CU-7439 PLUS PASTE
- Product Code
- 000000000002186250
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricants and lubricant additives
Manufacturers & Suppliers
Dow Corning Europe S.A.
rue Jules Bordet - Parc Industriel - Zone C, B-7180 Seneffe
Emergency Contacts
Dow Corning (Barry U.K. 24h)
+44 1446732350
24h
Dow Corning (Wiesbaden 24h)
+49 61122158
24h
Dow Corning (Seneffe 24h)
+32 64 888240
24h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Inorganic and organic compounds in mineral oil
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Copper metal powder EC: 231-159-6 | 7440-50-8 | 10 - 20% | Yes |
| 2-Heptadecenyl-4,4-(5H)-oxazoledimethanol EC: 249-355-5 | 28984-69-2 | 2.5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
Wash with water and soap as a precaution. Get medical attention if symptoms occur.
Flush eyes with water as a precaution. Get medical attention if irritation develops and persists.
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention if symptoms occur or if irritation develops and persists.
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical
None known.
Exposure to combustion products may be a hazard to health.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.
Firefighter Protection
Wear self-contained breathing apparatus for firefighting if necessary. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Follow safe handling advice and personal protective equipment recommendations.
For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container. Clean up remaining materials from spill with suitable absorbent.
Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water.
Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbent.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle in accordance with good industrial hygiene and safety practice. Take care to prevent spills, waste and minimize release to the environment.
Keep in properly labelled containers. Store in accordance with the particular national regulations.
Ensure that eye flushing systems and safety showers are located close to the working place. When using do not eat, drink or smoke. Wash contaminated clothing before re-use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations.
Wear the following personal protective equipment: Safety glasses
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Filter type : Combined particulates and organic vapour type (A-P)
Skin should be washed after contact.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not classified as a reactivity hazard.
Can react with strong oxidizing agents.
None known.
Oxidizing agents
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (Copper metal powder)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOLYKOTE(R) CU-7439 PLUS PASTE?
The signal word is warning.
What is the physical form of MOLYKOTE(R) CU-7439 PLUS PASTE?
MOLYKOTE(R) CU-7439 PLUS PASTE is a paste appearing as paste with bronze color. It has slight odor.
What is MOLYKOTE(R) CU-7439 PLUS PASTE used for?
Lubricants and lubricant additives
What are the hazard statements for MOLYKOTE(R) CU-7439 PLUS PASTE?
This substance has 1 hazard statement:
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of MOLYKOTE(R) CU-7439 PLUS PASTE?
The melting point is No data available and the boiling point is Not applicable.