Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TN-221BK, TN-241BK, TN-251BK, TN-261BK, TN-281BK Toner
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
These products are black toner in a cartridge for Brother Industries, Ltd. laser printers, multifunction devices and fax receivers. The cartridge should be used as supplied by Brother and for use in the products stated. Information provided on this SDS is only consistent with the use specified by Brother.
Manufacturers & Suppliers
Brother Industries, Ltd.
manufacturer
15-1 Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan
+81-52-824-2735
Brother International Corporation
importer
200 Crossing Boulevard, Bridgewater, NJ 08807, USA
+1-877-276-8437
Brother International Corporation (Canada) Ltd.
importer
1 Hotel de Ville, Dollard des Ormeaux, Quebec, H9B 3H6, Canada
+1-514-685-0600
Brother International Europe Ltd.
importer
Brother House, 1 Tame Street, Guide Bridge, Audenshaw, Manchester M34 5JE, UK
+44-161-330-6531
Brother International (Aust.) Pty. Ltd. ACN 001 393 835
importer
Level 3, Building A, 11 Talavera Road, Macquarie Park, NSW 2113, Australia
+61-2-9887-4344
Emergency Contacts
CHEMTREC
+1-703-527-3887
24 hours
CHEMTREC
+1-800-424-9300
24 hours
ORFILA
+33-1-45-425-959
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Styrene-acrylate Toner (Mixture)
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Styrene-acrylate copolymer | 25767-47-9 | 80 - 85% | No |
| Carbon Black (bound) EC: 215-609-9 | 1333-86-4 | 5 - 7% | No |
| Paraffin wax EC: 232-315-6 | 8002-74-2 | 2 - 4% | No |
| Fatty Acid Ester | --- | 2.5 - 4% | No |
| PMMA | 9011-14-7 | 2 - 3% | No |
| Silicon Dioxide (amorphous) EC: 231-545-4 | 112945-52-5 | 0.5 - 3% | No |
| Silicon Dioxide (amorphous) EC: 231-545-4 | 7631-86-9 | 0.1 - 1.5% | No |
| Styrene-acrylate Resin | --- | 0.1 - 2% | No |
Notes
For the full text of R-phrases and H-Statements see Section 16
First Aid Measures
Emergency procedures for chemical exposure incidents
Obtain immediate medical attention. In case of accident by inhalation remove casualty to fresh air and keep at rest.
Symptoms: For large quantities: May cause irritation to the respiratory system. Increased difficulty in breathing. Sneezing. Coughing.
Remove contaminated clothing immediately and wash affected skin with plenty of water or soap and water.
Obtain medical attention. If substance has got into the eyes, immediately wash out with plenty of water for at least 15 minutes.
Symptoms: May cause eye irritation.
Obtain immediate medical attention. Wash out mouth with water and give 100-200 ml of water to drink.
Symptoms: May cause stomach ache. Unlikely route of exposure.
Immediate Medical Attention
Obtain immediate medical attention for inhalation, eye contact, and ingestion. Treat symptomatically.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Good general ventilation should be sufficient under normal use.
Protective gloves.
Safety goggles.
Dust mask. (Large spillages: Respirator).
Long sleeved clothing and long pants.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TN-221BK, TN-241BK, TN-251BK, TN-261BK, TN-281BK Toner?
The signal word is no signal word.
What is the physical form of TN-221BK, TN-241BK, TN-251BK, TN-261BK, TN-281BK Toner?
TN-221BK, TN-241BK, TN-251BK, TN-261BK, TN-281BK Toner is a powder appearing as powder with black color. It has odorless odor.
What is the solubility of TN-221BK, TN-241BK, TN-251BK, TN-261BK, TN-281BK Toner?
Insoluble (water)
What is TN-221BK, TN-241BK, TN-251BK, TN-261BK, TN-281BK Toner used for?
These products are black toner in a cartridge for Brother Industries, Ltd. laser printers, multifunction devices and fax receivers. The cartridge should be used as supplied by Brother and for use in the products stated. Information provided on this SDS is only consistent with the use specified by Brother.