NextSDS Logo
Safety Data Sheet EN

TN-630 TN-660 TN-2340 TN-2370 TN-2310 TN-2320 TN-2335 TN-2375 TN-2330 TN-2350 TN-2315 TN-2345 TN-2360 TN-2380 TN-2305 TN-2355 TN-2306 TN-2356 TN-2365 TN-2385 TN-2312 TN-2325 TN-2399 Toner

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TN-630 TN-660 TN-2340 TN-2370 TN-2310 TN-2320 TN-2335 TN-2375 TN-2330 TN-2350 TN-2315 TN-2345 TN-2360 TN-2380 TN-2305 TN-2355 TN-2306 TN-2356 TN-2365 TN-2385 TN-2312 TN-2325 TN-2399 Toner
Product Code
BPL-01

Regulatory Identifiers

CAS Number
N/A

Identified Uses

These products are black toner in a cartridge for Brother Industries, Ltd. laser printers, multifunction devices and fax receivers. This cartridge should be used as supplied by Brother and for use in the products stated. Information provided on this SDS is only consistent with the use specified by Brother.

Uses advised against

No information available

Manufacturers & Suppliers

B

Brother Industries, Ltd.

manufacturer

15-1 Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan

+81-52-824-2735

B

Brother International Corporation

distributor

200 Crossing Boulevard, Bridgewater, NJ 08807, USA

+1-877-276-8437

Emergency Contacts

CHEMTREC

+1-703-527-3887

CHEMTREC

+1-800-424-9300

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Polyester resin --- --- No
N,N-diethyl-N-methyl-2-(2-methyl-1-oxo-2-propenyl)oxyethanaminium salt with 4-methylbenzenesulfonic acid (1:1) polymer with butyl 2-propenoate and ethenylbenzene 133350-42-2 5 - 10% No
Carbon Black (bound) 1333-86-4 1 - 5% No
Rosin, fumarated 65997-04-8 1 - 2.5% No

** Trade secret

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air and keep at rest in a position comfortable for breathing. Get immediate medical advice/attention.

Symptoms: For large quantities: May cause irritation to the respiratory system. Increased difficulty in breathing. Sneezing. Coughing

Skin contact

Take off contaminated clothing. Wash off immediately with soap and plenty of water.

Eye contact

Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician.

Symptoms: May cause eye irritation

Ingestion

Obtain immediate medical attention. Wash out mouth with water and give 100-200 ml of water to drink.

Symptoms: May cause stomach ache. Unlikely route of exposure

Immediate Medical Attention

Get immediate medical advice/attention (inhalation). Obtain immediate medical attention (ingestion).

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical, Water spray

Unsuitable media

Do not use water jet.

Specific hazards

May form explosive dust clouds in air

Firefighter Protection

Do not use high-pressure water in order to prevent creating a dust cloud and spreading fire dust. Use appropriate respirator for carbon monoxide and carbon dioxide. Wear positive pressure self-contained breathing apparatus (SCBA) during the attack phase of firefighting operations and during cleanup in enclosed or poorly ventilated areas immediately after a fire. Personnel not having suitable respiratory protection must leave the area to prevent significant exposure to toxic combustion gases from any source.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Sweep the spilt toner or remove it with a vacuum cleaner and transfer into a sealed container carefully. Sweep slowly to minimize generation of dust during cleanup. If a vacuum cleaner is used, the motor must be rated as dust explosion proof.

Environmental

Prevent substance entering sewers. Washings must be prevented from entering surface water drains.

Cleanup methods

Take up mechanically, placing in appropriate containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep out of the reach of children. Avoid generation of dust. Avoid inhalation of high concentrations of dust. Avoid contact with eyes.

Storage

Keep away from oxidizing agents.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Good general ventilation should be sufficient under normal use.

Hands

If there is a risk of contact.: Protective gloves.

Eyes

If splashes are likely to occur.: Safety goggles.

Respiratory

Face Mask. In case of large spillages: Wear suitable respiratory protective equipment.

Skin/Body

If there is a risk of contact.: Long sleeved clothing and long pants.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Solid Powder
Physical State Data
solid
State Under Standard Conditions
---
Appearance
---
Colour
black
Colour Intensity
---
Form
---
Odor
Odorless
Odor Threshold
No information available
Ph
Not applicable
Melting Point
No data available
Boiling Point
Not applicable
Flash Point
Not applicable
Freezing Point
---
Softening Point
No information available
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Vapor Pressure
Not applicable
Vapor Density
Not applicable
Relative Density
1.2
Bulk Density
No information available
Density
---
Flammability
Not applicable
Upper Explosive Limit
Not applicable
Lower Explosive Limit
Not applicable
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
partially soluble (Toluene, Chloroform and tetrahydrofuran)
Partition Coefficient
No data available
Solubility In Water
Insoluble in water
Solubility In Fat
---
Molecular Weight
No information available
Voc Content
No information available
Metal Corrosion
---
Dynamic Viscosity
Not applicable
Kinematic Viscosity
Not applicable
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No information available.

Hazardous reactions

No information available.

Avoid

Keep away from heat. Avoid friction, sparks, or other means of ignition

Incompatible

Strong oxidizing agents

Decomposition

Carbon monoxide. Carbon dioxide (CO₂). Nitrogen oxides (NOx).

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TN-630 TN-660 TN-2340 TN-2370 TN-2310 TN-2320 TN-2335 TN-2375 TN-2330 TN-2350 TN-2315 TN-2345 TN-2360 TN-2380 TN-2305 TN-2355 TN-2306 TN-2356 TN-2365 TN-2385 TN-2312 TN-2325 TN-2399 Toner?

The signal word is no signal word.

What is the physical form of TN-630 TN-660 TN-2340 TN-2370 TN-2310 TN-2320 TN-2335 TN-2375 TN-2330 TN-2350 TN-2315 TN-2345 TN-2360 TN-2380 TN-2305 TN-2355 TN-2306 TN-2356 TN-2365 TN-2385 TN-2312 TN-2325 TN-2399 Toner?

TN-630 TN-660 TN-2340 TN-2370 TN-2310 TN-2320 TN-2335 TN-2375 TN-2330 TN-2350 TN-2315 TN-2345 TN-2360 TN-2380 TN-2305 TN-2355 TN-2306 TN-2356 TN-2365 TN-2385 TN-2312 TN-2325 TN-2399 Toner is a solid powder with black color. It has odorless odor.

What is the solubility of TN-630 TN-660 TN-2340 TN-2370 TN-2310 TN-2320 TN-2335 TN-2375 TN-2330 TN-2350 TN-2315 TN-2345 TN-2360 TN-2380 TN-2305 TN-2355 TN-2306 TN-2356 TN-2365 TN-2385 TN-2312 TN-2325 TN-2399 Toner?

partially soluble (Toluene, Chloroform and tetrahydrofuran)

What is TN-630 TN-660 TN-2340 TN-2370 TN-2310 TN-2320 TN-2335 TN-2375 TN-2330 TN-2350 TN-2315 TN-2345 TN-2360 TN-2380 TN-2305 TN-2355 TN-2306 TN-2356 TN-2365 TN-2385 TN-2312 TN-2325 TN-2399 Toner used for?

These products are black toner in a cartridge for Brother Industries, Ltd. laser printers, multifunction devices and fax receivers. This cartridge should be used as supplied by Brother and for use in the products stated. Information provided on this SDS is only consistent with the use specified by Brother.

What is the melting point of TN-630 TN-660 TN-2340 TN-2370 TN-2310 TN-2320 TN-2335 TN-2375 TN-2330 TN-2350 TN-2315 TN-2345 TN-2360 TN-2380 TN-2305 TN-2355 TN-2306 TN-2356 TN-2365 TN-2385 TN-2312 TN-2325 TN-2399 Toner?

The melting point is No data available and the boiling point is Not applicable.