Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TECTANE Zinc Alu Spray
- Product Form
- Spray
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lacquer
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
DEN BRAVEN AEROSOLS GmbH & Co. KG
manufacturer
Giebelstadter Weg 16, D-97234 Albertshausen
http://www.denbraven-aerosols.de
Emergency Contacts
DEN BRAVEN AEROSOLS GmbH & Co. KG
+49 (0)9366/9071-0
Monday to Thursday 7:15 to 18:00 CET
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone EC: 200-662-2 | 67-64-1 | 20 - 25% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 10 - 20% | Yes |
| dimethyl ether EC: 204-065-8 | 115-10-6 | 10 - 20% | Yes |
| xylene EC: 215-535-7 | 1330-20-7 | 10 - 20% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 5 - 10% | Yes |
| Hydrocarbons, C9, aromatics EC: 918-668-5 | --- | 5 - 10% | Yes |
| Hydrocarbons, C7, n-alkanes, isoalkanes, cycloalkanes EC: 927-510-4 | --- | 5 - 10% | Yes |
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cycloalkanes, < 5 % n-hexane EC: 921-024-6 | --- | 5 - 10% | Yes |
| zinc powder -zinc dust (stabilized) EC: 231-175-3 | 7440-66-6 | 2.5 - 5% | Yes |
| aluminium powder (stabilized) EC: 231-072-3 | --- | 2.5 - 5% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 2.5 - 5% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 1 - 2.5% | Yes |
| 2-butanone oxime EC: 202-496-6 | 96-29-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints. Take affected persons into fresh air and keep quiet.
Symptoms: Breathing difficulty, Coughing.
Immediately wash with water and soap and rinse thoroughly. Immediately remove any clothing soiled by the product.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Do not induce vomiting; call for medical help immediately.
Symptoms: Nausea
Immediate Medical Attention
If swallowed or in case of vomiting, danger of entering the lungs.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, Fire-extinguishing powder, Carbon dioxide
Water with full jet
Can form explosive gas-air mixtures. Formation of toxic gases is possible during heating or in case of fire.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Avoid contact with skin and eyes.
Store in a cool location. Observe official regulations on storing packagings with pressurised containers. Protect from heat and direct sunlight.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Additional information about design of technical facilities: No further data; see item 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Material of gloves: Butyl rubber, BR. Recommended thickness of the material: ≥ 0.7 mm. Penetration time of glove material: ≥60 min. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not required. Recommended filter device for short term use: Filter AX
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
Carbon monoxide and carbon dioxide
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TECTANE Zinc Alu Spray?
The signal word is danger.
What is the physical form of TECTANE Zinc Alu Spray?
TECTANE Zinc Alu Spray is a aerosol with silver-coloured color. It has solvent-like odor.
What is TECTANE Zinc Alu Spray used for?
Lacquer
What are the hazard statements for TECTANE Zinc Alu Spray?
This substance has 5 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of TECTANE Zinc Alu Spray?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..