Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Metaflux 70-45 Zinc-Spray
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Corrosion protection
Manufacturers & Suppliers
Metatec Limited
distributor
Metaflux Building, Fitzherbert Road, Portsmouth, Hants. PO6 1RU
02392 381 382
Emergency Contacts
Metatec Limited
02392 381 382
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS09
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Xylene EC: 215-535-7 | 1330-20-7 | 1 - 12.5% | Yes |
| 2-METHOXY – 1 METHYLETHYL ACETATE EC: 203-603-9 | 108-65-6 | 1 - 20% | Yes |
| Acetone EC: 200-662-2 | 67-64-1 | 1 - 20% | Yes |
| Zinc powder - zinc dust (stabilized) EC: 231-175-3 | 7440-66-6 | 25 - 40% | Yes |
| Dimethyl ether EC: 204-065-8 | 115-10-6 | 30 - 60% | Yes |
| Zinc oxide EC: 215-222-5 | 1314-13-2 | 0.1 - 2.5% | Yes |
| Naphtha (petroleum), hydrodesulfurized heavy EC: 265-185-4 | 64742-82-1 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Artificial respiration apparatus necessary.
Symptoms: Respiratory arrest.
Wash thoroughly using copious water - remove contaminated clothing immediately.
Wash thoroughly for several minutes using copious water - call doctor immediately, have Data Sheet available.
Do not induce vomiting. Consult doctor immediately. Keep Data Sheet available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation. This can be achieved by local suction or general air extraction.
Protective nitrile gloves (EN 374). Additional information on hand protection - No tests have been performed. Selection made for preparations according to the best available knowledge and information on the ingredients. Selection of materials derived from glove manufacturer's indications. Final selection of glove material must be made taking the breakthrough times, permeation rates and degradation into account. Selection of a suitable glove depends not only on the material but also on other quality characteristics and varies from manufacturer to manufacturer. In the case of preparations the resistance of glove materials cannot be calculated in advance so it has to be tested before use. The exact breakthrough time of the glove material can be requested from the protective glove manufacturer and must be observed.
Tight fitting protective goggles with side protection (EN 166).
If OES or MEL is exceeded. Filter AX EN 14387.
Protective working garments (e.g. safety shoes EN 344, long-sleeved protective working garments). According to operation.
n.av.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Metaflux 70-45 Zinc-Spray?
The signal word is danger.
What is the physical form of Metaflux 70-45 Zinc-Spray?
Metaflux 70-45 Zinc-Spray is a aerosol with liquid n.av. color. It has characteristic odor.
What is Metaflux 70-45 Zinc-Spray used for?
Corrosion protection
What are the hazard statements for Metaflux 70-45 Zinc-Spray?
This substance has 2 hazard statements:
- H220: Product is extremely flammable.
- H411: Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
What is the melting point of Metaflux 70-45 Zinc-Spray?
The melting point is n.av. and the boiling point is n.av..