Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Metaflux 70-45 Zinc-Spray commonly used aerosol.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H410: Very toxic to aquatic life with long lasting effects.
Precautionary Statements
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211: Do not spray on an open flame or other ignition source.
- P251: Do not pierce or burn, even after use.
- P391: Collect spillage.
- P410+P412: Protect from sunlight. Do no expose to temperatures exceeding 50 C/122 F.
- P501: Dispose of contents/container to in accordance with official regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Metatec Limited
undefined
Metaflux Building, Fitzherbert Road Portsmouth, Hampshire PO6 1RU
GB
02392 380 888
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
02392 381 382
GB
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixtureChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| dimethyl ether EC: 204-065-8 | 115-10-6 | 45-50% | ⚠️ Hazardous |
| zinc powder - zinc dust (stabilized) EC: 231-175-3 | 7440-66-6 | 25-30% | ⚠️ Hazardous |
| acetone; propan-2-one; propanone EC: 200-662-2 | 67-64-1 | 10-15% | ⚠️ Hazardous |
| xylene EC: 215-535-7 | 1330-20-7 | 5-10% | ⚠️ Hazardous |
| Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%) EC: 919-446-0 | N/A | 1-5% | ⚠️ Hazardous |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 1-5% | ⚠️ Hazardous |
| zinc oxide EC: 215-222-5 | 1314-13-2 | 1-5% | ⚠️ Hazardous |
Composition Notes
Product does not contain listed SVHC substances.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
remove casualty to fresh air and keep at rest.
Symptoms:
irritation of the respiratory tract
🖐️ Skin Contact
After contact with skin, wash immediately with plenty of water and soap.
Symptoms:
skin irritation
👁️ Eye Contact
Rinse immediately carefully and thoroughly with eye-bath or water.
Symptoms:
troubles or persistent symptoms
🍽️ Ingestion/Swallowing
If swallowed, immediately drink: Water. Never give anything by mouth to an unconscious person or a person with cramps. Do not induce vomiting.
Symptoms:
Risk of aspiration!
🚨 Immediate Medical Attention Required
Treat symptomatically.
Medical Treatment
Treat symptomatically.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
If suction of the immediate vicinity is impossible or insufficient, adequate airing of the working place must be ensured.
🧤 Hand Protection
In case of prolonged or frequently repeated skin contact: Pull-over gloves of rubber. DIN EN 374 Suitable material: (penetration time (maximum wearing period): >=4h): Butyl rubber. (0,5mm) In case of reutilization, clean gloves before taking off and store in well-aired place.
👁️ Eye Protection
Wear safety glasses; chemical goggles (if splashing is possible).
😷 Respiratory Protection
With correct and proper use, and under normal conditions, breathing protection is not required. Respiratory protection required in case of: exceeding critical value insufficient ventilation. Suitable respiratory protective equipment: Combination filter device (DIN EN 141).. Type A/P3 Only use breathing apparatus with CE-label including the four-digit identification number.
🦺 Skin/Body Protection
Protective clothing.
🌍 Environmental Exposure Controls
Do not empty into drains or the aquatic environment.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1950
📦 Proper Shipping Name
AEROSOLS
⚠️ Transport Hazard Class
2
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Metaflux 70-45 Zinc-Spray?
The signal word for this substance is "danger".
What is the physical form of Metaflux 70-45 Zinc-Spray?
Metaflux 70-45 Zinc-Spray is a aerosol with grey color. It has characteristic odor.
What is Metaflux 70-45 Zinc-Spray used for?
Aerosol
What are the hazard statements for Metaflux 70-45 Zinc-Spray?
This substance has 4 hazard statements: H222: Extremely flammable aerosol. H229: Pressurised container: May burst if heated. H319: Causes serious eye irritation. H410: Very toxic to aquatic life with long lasting effects.