Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SILICONE GREASE
- Product Code
- 34920
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY Lubricant
Manufacturers & Suppliers
KENT (United Kingdom) Ltd
manufacturer
Forsyth House Pitreavie Drive Pitreavie Business Park Dunfermline Fife KY11 8US
0800 136925
Emergency Contacts
Emergency Contact
+44 01383 723344
During normal office hours - Monday - Thursday 8.30am - 5.30pm, Friday 9.00am - 3.00pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with harmless additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| N/A | --- | 50 - 75% | Yes |
| N/A | --- | 10 - 25% | Yes |
| N/A | --- | 1 - 10% | Yes |
For the wording of the listed hazard phrases refer to section 16. Note P is applicable for the product on one or more of its components. Benzene concentration is <0.1% (w/w%) Note K is applicable for the product on one or more of its components. Classification in accordance with Annexe 1 for the reported danger properties. Contains < 0.1% w/w 1,3-butadiene (Einecs-nr. 203-450-8)
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of symptoms.
Instantly wash with water and soap and rinse thoroughly.
Symptoms: skin irritation
Rinse opened eye for several minutes under running water.
Rinse out mouth. Do not induce vomiting; instantly call for medical help.
Immediate Medical Attention
No further relevant information available.
Medical Treatment
No further relevant information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Wear suitable gloves tested to EN 374. Nitrile rubber, NBR. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Value for the permeation: Level 6 480 minutes. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses (EN 166)
Only during spraying without adequate removal by suction. Short term filter device: filter AX
Protective work clothing. (EN-13034/6)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1950
- Packing Group
- Void
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for SILICONE GREASE?
The signal word is danger.
What is the physical form of SILICONE GREASE?
SILICONE GREASE is a aerosol with whitish color. It has characteristic odor.
What is the solubility of SILICONE GREASE?
Unsoluble
What is SILICONE GREASE used for?
FOR PROFESSIONAL AND INDUSTRIAL USE ONLY Lubricant
What are the hazard statements for SILICONE GREASE?
This substance has 4 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H336: May cause drowsiness or dizziness.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of SILICONE GREASE?
The melting point is Not determined and the boiling point is Not applicable, as aerosol.