Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- AMS4 SILICONE GREASE
- Product Form
- Aerosol
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Lubricants
Manufacturers & Suppliers
CRC Industries UK Ltd.
manufacturer
Ambersil House - Wylds Road, Castlefield Industrial Estate, TA6 4DD Bridgwater Somerset, United Kingdom
+44 1278 727200
Emergency Contacts
Emergency Contact
(+44)(0)1278 72 7200
office hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons,C3-4-rich, petroleum distillate Petroleumgas (1,3-butadiene < 0.1%) EC: 270-990-9 | 68512-91-4 | 30 - 60% | Yes |
| Hydrocarbons, C7-C8, cyclics EC: 927-033-1 | --- | 30 - 60% | Yes |
| propan-2-ol; isopropyl alcohol isopropanol EC: 200-661-7 | 67-63-0 | 5 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.
Symptoms: Excessive inhalation of solvent vapours may give rise to nausea, headaches and dizziness
Take off contaminated clothing and wash before reuse. IF ON SKIN: Wash with plenty of soap and water. If skin irritation occurs: Get medical advice/attention.
Symptoms: Irritating to skin. Symptoms : redness and pain
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Irritating to eyes. Symptoms : redness and pain, impaired vision
If swallowed do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention
Symptoms: After vomiting of swallowed product aspiration into lungs is likely. Solvents may induce chemical pneumonia. Symptoms : sore throat, abdominal pain, nausea, vomiting
Immediate Medical Attention
If aspiration is suspected obtain immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, carbon dioxide or dry agent
water jet
Aerosols may explode if heated above 50°C
Keep container(s) exposed to fire cool, by spraying with water
Firefighter Protection
In case of fire, do not breathe fumes
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter public sewers and watercourses
Absorb spillage in suitable inert material; Place in appropriate container
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from heat and sources of ignition. Do not breathe aerosols or vapours. Avoid contact with skin and eyes. Wear protective gloves/protective clothing/eye protection/face protection.
Pressurized container : protect from sunlight and do not expose to temperatures exceeding 50°C. Keep out of reach of children.
Wash thoroughly after use. Eyewash bottles should be available.
Keep away from heat and sources of ignition. Take precautionary measures against static discharges. Equipment should be earthed. Use explosion-proof electrical/ventilating/lighting/.../equipment. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation Keep away from heat and sources of ignition Take precautionary measures against static discharges
When handling the product wear chemical-resistant gloves (standard EN 374). Recommended gloves: Nitrile. The breakthrough time of the glove should be longer than the total duration of product use. If work lasts longer than the breakthrough time, gloves should be changed part-way through. Depending on amount and duration of use and the risk of contact with the product the gloves manufacturer can assist you in the selection of the right glove material and breakthrough time.
Wear safety eyewear according to EN 166.
In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid release to the environment. Collect spillage.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
No hazardous reactions known if used for its intended purpose
No hazardous reactions known if used for its intended purpose
Avoid overheating
Strong oxidising agent
CO,CO2
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS (Methylcyclohexane)
- Transport Class
- 2.1
- Packing Group
- Not applicable.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for AMS4 SILICONE GREASE?
The signal word is danger.
What is the physical form of AMS4 SILICONE GREASE?
AMS4 SILICONE GREASE is a propane/butane propelled liquid. with off-white. color. It has solvent. odor.
What is AMS4 SILICONE GREASE used for?
Lubricants
What are the hazard statements for AMS4 SILICONE GREASE?
This substance has 6 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressurised container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.