NextSDS Logo
Safety Data Sheet EN

WHITE LITHIUM GREASE (AEROSOL)

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WHITE LITHIUM GREASE (AEROSOL)
Product Code
5037

Regulatory Identifiers

CAS Number
N/A

Identified Uses

GREASE LUBRICANT LUBRICANT - AEROSOL

Manufacturers & Suppliers

CRC INDUSTRIES (AUST) PTY LIMITED logo

CRC INDUSTRIES (AUST) PTY LIMITED

national supplier

9 Gladstone Road, Castle Hill, NSW, 2154, AUSTRALIA

(02) 9849 6700

www.crcindustries.com.au

Emergency Contacts

PIC

13 11 26

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1 H222
Aerosols - Pressurised Cat. 1 H229
Aquatic Chronic Cat. 2 H411

GHS Pictograms

GHS02 - Flammable

GHS02

GHS09 - Environmental hazard

GHS09

Hazard Statements

H222 Extremely flammable aerosol.
H229 Pressurized container: may burst if heated.
H411 Toxic to aquatic life with long lasting effects.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after use.
P273 Avoid release to the environment.
P391 Collect spillage.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50C.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type Mixture
Chemical Name CAS Number Concentration Hazardous
Highly refined mineral oil (C15 -C50)* EC: 265-169-7 64742-65-0 10 - 30% No
Naphtha (petroleum), hydrotreated light EC: 265-151-9 64742-49-0 30 - 60% No
Petroleumgassen, vloeibaar gemaakt (bevat minder dan 0,1 gewichtspercent 1,3-butadieen (EINECS-nr. 203-450-8)). EC: 270-704-2 68476-85-7 10 - 30% No
nkoxide 1,2-benzisothiazool-3(2H)-on EC: 215-222-5 1314-13-2 5% No
TRIBUTYL BORATE EC: 211-706-5 688-74-4 0.5 - 1.5% No
Zinkdithiofosfaat EC: 272-028-3 68649-42-3 1 - 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove from contaminated area. Apply artificial respiration if not breathing.

Skin contact

If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water. Continue flushing with water until advised to stop by a Poisons Information Centre or a doctor.

Eye contact

If in eyes, hold eyelids apart and flush continuously with running water. Continue flushing until advised to stop by a Poisons Information Centre, a doctor, or for at least 15 minutes.

Ingestion

For advice, contact a Poisons Information Centre on 13 11 26 (Australia Wide) or a doctor (at once). If swallowed, do not induce vomiting.

Immediate Medical Attention

Treat symptomatically.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Avoid inhalation. Use in well ventilated areas. Where an inhalation risk exists, mechanical explosion proof extraction ventilation is recommended. Flammable vapours may accumulate in poorly ventilated or confined areas. Vapours are heavier than air and may travel some distance to an ignition source and flash back.

Hands

Wear nitrile or neoprene gloves.

Eyes

Wear splash-proof goggles.

Respiratory

Where an inhalation risk exists, wear a Type A-Class P1 (Organic gases/vapours and Particulate) respirator. Where the boiling point is < 65C, use an AX filter type.

Skin/Body

When using large quantities or where heavy contamination is likely, wear coveralls.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
---
Crystallisation Point
---
Solubility In Fat
---
Form
---
Auto Ignition Temperature
NOT AVAILABLE
State Under Standard Conditions
---
Explosive Limits
---
Relative Density
0.663
Freezing Point
---
Odor
SOLVENT ODOUR
Physical State Data
---
Boiling Point
59C (Initial)
Molecular Weight
---
Solidification Point
---
Density
---
Decomposition Temperature
NOT AVAILABLE
Flammability
EXTREMELY FLAMMABLE
Metal Corrosion
---
Relative Evaporation Rate
---
Solubility
---
Partition Coefficient
NOT AVAILABLE
Vapor Density
- 1 (Air = 1)
Properties Status
---
Odor Threshold
NOT AVAILABLE
Softening Point
---
Vapor Pressure
NOT AVAILABLE
Solubility In Water
INSOLUBLE
Evaporation Rate
NOT AVAILABLE
Bulk Density
---
Cloud Point
---
Voc Content
---
Melting Point
NOT AVAILABLE
Kinematic Viscosity
---
Upper Explosive Limit
NOT AVAILABLE
Flash Point
< -5C
Lower Explosive Limit
NOT AVAILABLE
Ph
NOT AVAILABLE
Colour
---
Physical State
---
Colour Intensity
---
Appearance
VISCOUS OFF-WHITE LIQUID (AEROSOL DISPENSED)
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
AEROSOLS
Transport Class
2.1
Packing Group
None allocated.
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for WHITE LITHIUM GREASE (AEROSOL)?

The signal word is danger.

What is WHITE LITHIUM GREASE (AEROSOL) used for?

GREASE LUBRICANT LUBRICANT - AEROSOL

What are the hazard statements for WHITE LITHIUM GREASE (AEROSOL)?

This substance has 3 hazard statements:

  • H222: Extremely flammable aerosol.
  • H229: Pressurized container: may burst if heated.
  • H411: Toxic to aquatic life with long lasting effects.

What is the melting point of WHITE LITHIUM GREASE (AEROSOL)?

The melting point is NOT AVAILABLE and the boiling point is 59C (Initial).

Compliance Scanner

Scan your compliance