NextSDS Logo
Safety Data Sheet EN

WD-40 Specialist™ Protective White Lithium Grease

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
WD-40 Specialist™ Protective White Lithium Grease
Synonyms
Low VOC

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaner, Lubricant

Uses advised against

None identified

Manufacturers & Suppliers

W

WD-40 Company

manufacturer

9715 Businesspark Avenue San Diego, California, USA 92131

1-888-324-7596

Emergency Contacts

Emergency Contact

1-888-324-7596

Chemtrec

1-800-424-9300

Emergency Contact

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Aerosol Cat. 1
Asp. Tox. Cat. 1

GHS Pictograms

GHS02 - Flammable

GHS02

GHS08 - Serious health hazard

GHS08

Hazard Statements

H222 Extremely Flammable Aerosol.
H229 Pressurized container: may burst if heated.
H304 May be fatal if swallowed and enters airways.

Precautionary Statements

P210 Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Do not pierce or burn, even after use.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or physician.
P331 Do NOT induce vomiting.
P405 Store locked up.
P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
P501 Dispose of contents and container in accordance with local and national regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Petroleum Solvents (LVP) 64742-47-8 50 - 60% Yes
Propellant (propane) 74-98-6 25% Yes
Petroleum Distillates, Hydrotreated heavy paraffin 64742-54-7 5 - 15% No
Titanium Dioxide 13463-67-7 5% Yes
Zinc Oxide 1314-13-2 3% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If irritation is experienced, move to fresh air. Get medical attention if irritation or other symptoms develop and persist.

Symptoms: May cause respiratory irritation. Inhalation may cause coughing, headache, and dizziness.

Skin contact

Wash with soap and water. If irritation develops and persists, get medical attention.

Symptoms: Skin contact may cause drying of the skin.

Eye contact

Flush thoroughly with water. Remove contact lenses if present after the first 5 minutes and continue flushing for several more minutes. Get medical attention if irritation persists.

Symptoms: May cause eye irritation.

Ingestion

Aspiration Hazard. Call physician, poison control center or the WD-40 Safety Hotline at 1-888-324-7596 immediately.

Symptoms: Harmful or fatal if swallowed. If swallowed, may be aspirated and cause lung damage.

Immediate Medical Attention

Immediate medical attention is needed for ingestion.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water fog, dry chemical, carbon dioxide or foam.

Unsuitable media

Do not use water jet or flooding amounts of water. Burning product will float on the surface and spread fire.

Specific hazards

Extremely flammable aerosol. Contents under pressure. Keep away from ignition sources and open flames. Exposure of containers to extreme heat and flames can cause them to rupture often with violent force. Vapors are heavier than air and may travel along surfaces to remote ignition sources and flash back. A vapor and air mixture can create an explosion hazard in confined spaces.

Instructions

Cool fire-exposed containers with water. Use shielding to protect against bursting containers.

Firefighter Protection

Firefighters should always wear positive pressure self-contained breathing apparatus and full protective clothing.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Wear appropriate protective clothing (see Section 8). Eliminate all sources of ignition and ventilate area.

Cleanup methods

Clean spill area thoroughly.

Materials: inert absorbent

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes. Avoid prolonged contact with skin. Avoid breathing vapors or aerosols. Use only with adequate ventilation. Keep away from heat, sparks, pilot lights, hot surfaces, and open flames. Unplug electrical tools, motors, and appliances before spraying or bringing the can near any source of electricity. Electricity can burn a hole in the can and cause contents to burst into flames. To avoid serious burn injury, do not let the can touch battery terminals, electrical connections on motors or appliances or any other source of electricity. Wash thoroughly with soap and water after handling. Keep containers closed when not in use. Keep out of the reach of children. Do not puncture, crush, or incinerate containers, even when empty.

Storage

Store in a cool, well-ventilated area, away from incompatible materials. Do not store above 120°F or in direct sunlight. U.F.C (NFPA 30B) Level 3 Aerosol. Store away from oxidizers.

Hygiene

Wash thoroughly with soap and water after handling.

Fire prevention

Keep away from heat, sparks, pilot lights, hot surfaces, and open flames. Unplug electrical tools, motors, and appliances before spraying or bringing the can near any source of electricity.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Colorless
Colour Intensity
---
Form
---
Odor
Mild petroleum odor
Odor Threshold
---
Ph
Not Applicable
Melting Point
Not established
Boiling Point
225-256°C (437-492.8°F) (Petroleum Solvent)
Flash Point
>156°F (>69°C) (estimated)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
Not established
Vapor Density
---
Relative Density
0.87
Bulk Density
---
Density
---
Flammability
Flammable Aerosol
Upper Explosive Limit
5% (Petroleum Solvent)
Lower Explosive Limit
0.6% (Petroleum Solvent)
Explosive Limits
---
Auto Ignition Temperature
Not established
Decomposition Temperature
Not established
Solubility
---
Partition Coefficient
Not established
Solubility In Water
Insoluble in water
Solubility In Fat
---
Molecular Weight
---
Voc Content
24.16% MIR=0.44g O3/g
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Not established
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable

Reactivity

Not reactive under normal conditions

Hazardous reactions

May react with strong oxidizers generating heat.

Avoid

Avoid heat, sparks, flames, and other sources of ignition. Do not puncture or incinerate containers.

Incompatible

Strong acids, alkalis, and oxidizers.

Decomposition

Carbon monoxide and carbon dioxide, oxides of nitrogen and sulfur, smoke, fumes, and/or unburned hydrocarbons.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Ecotoxicity

No specific aquatic toxicity data is currently available. Zinc oxide is classified as very toxic to aquatic environment.

No specific aquatic toxicity data is currently available. Zinc oxide is classified as very toxic to aquatic environment.

Persistence and Degradability

No data available.

No data available.

Bioaccumulative Potential

No data available.

No data available.

Mobility in Soil

No data available

No data available.

Results of PBT and vPvB assessment

No data available.

No data available.

Endocrine disrupting properties

No data available.

No data available.

Other Adverse Effects

None known

None known

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

It is the responsibility of the generator to determine at the time of disposal the proper classification and method of disposal.

Waste Codes

D001 ignitable hazardous waste RCRA
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1950
Shipping Name
Aerosols
Transport Class
2.1
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is WD-40 Specialist™ Protective White Lithium Grease known by?

WD-40 Specialist™ Protective White Lithium Grease is also known as: Low VOC

What is the hazard signal word for WD-40 Specialist™ Protective White Lithium Grease?

The signal word is danger.

What is the physical form of WD-40 Specialist™ Protective White Lithium Grease?

WD-40 Specialist™ Protective White Lithium Grease is a liquid with colorless color. It has mild petroleum odor odor.

What is WD-40 Specialist™ Protective White Lithium Grease used for?

Cleaner, Lubricant

What are the hazard statements for WD-40 Specialist™ Protective White Lithium Grease?

This substance has 3 hazard statements:

  • H222: Extremely Flammable Aerosol.
  • H229: Pressurized container: may burst if heated.
  • H304: May be fatal if swallowed and enters airways.

What is the melting point of WD-40 Specialist™ Protective White Lithium Grease?

The melting point is Not established and the boiling point is 225-256°C (437-492.8°F) (Petroleum Solvent).