Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MultiSil® ChloroSil 1.000 F
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Water disinfection, SU21 - Consumer uses: Private households (= general public = consumers), PC8 - Biocidal products (e.g. Disinfectants, pest control)
Manufacturers & Suppliers
Peter Gelzhäuser GmbH
manufacturer
Boschstr. 12, D-82178 Puchheim
+49 89 800 718 35
Emergency Contacts
Toxicological Information Center Erfurt
+49/361 730 730
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| calcium chloride EC: 233-140-8 | 10043-52-4 | 0.1% | Yes |
| calcium hypochlorite EC: 231-908-7 | 7778-54-3 | 2.5% | Yes |
| Silver EC: 231-131-3 | 7440-22-4 | 0.1% | No |
| sodium nitrate EC: 231-554-3 | 7631-99-4 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure of fresh air. If intensive inhalation of dust seek medical treatment immediately. In the event of symptoms refer for medical treatment.
In case of contact with skin wash off with soap and water. Consult a doctor if skin irritation persists.
In case of contact with eyes rinse with plenty of water carefully. In the event of persistent symptoms seek medical treatment.
Do not induce vomiting. If swallowed seek medical advice immediately and show the doctor packing or label. Rinse out mouth thoroughly with water. Give plenty of water to drink in small sips.
Immediate Medical Attention
If intensive inhalation of dust seek medical treatment immediately. If swallowed seek medical advice immediately and show the doctor packing or label.
Medical Treatment
No information available.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Product does not burn, fire-extinguishing activities according to surrounding. Foam, Dry powder, Carbon dioxide, Water spray jet
Full water jet
Fire gas of organic material has to be classed invariably as respiratory poison.
Firefighter Protection
Use breathing apparatus with independent air supply.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid contact with skin and eyes. Ensure adequate ventilation. Avoid dust formation. Use personal protective clothing.
Do not discharge into the drains/surface waters/groundwater.
Take up mechanically and send for disposal. Send in suitable containers for recovery or disposal. Take up dry.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not inhale dust. Avoid contact with the eyes. Take the usual precautions when handling chemicals.
Keep in closed original container. Protect from heat and direct solar radiation. Keep container dry, tightly closed and store at cool and aired place. Protect from wetness.
Keep away from food and drink. Wash hands before breaks and after work.
Avoid sedimentation of dust.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Care for thorough room ventilation, if necessary provide local air ventilation.
nitrile rubber or butyle rubber; 0,5 mm; ca 480 Min.
safety goggles
Particle filter P2 In case of dust formation wear micro dust mask.
Light protective clothing, antistatic
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazardous reactions known.
No information available.
No decomposition if used as directed.
Reactions with strong acids. Reactions with strong oxidising agents.
No hazardous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In accordance with regulations for special waste, must be taken to a special waste disposal. The waste disposal has to be proved.
Dispose of as hazardous waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (calcium hypochlorite)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MultiSil® ChloroSil 1.000 F?
The signal word is warning.
What is the physical form of MultiSil® ChloroSil 1.000 F?
MultiSil® ChloroSil 1.000 F is a fluid appearing as fluid with limpid color. It has odourless odor.
What is MultiSil® ChloroSil 1.000 F used for?
Water disinfection, SU21 - Consumer uses: Private households (= general public = consumers), PC8 - Biocidal products (e.g. Disinfectants, pest control)
What are the hazard statements for MultiSil® ChloroSil 1.000 F?
This substance has 2 hazard statements:
- H319: Causes serious eye irritation.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of MultiSil® ChloroSil 1.000 F?
The melting point is not applicable and the boiling point is 1440 °C.