Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MultiMan® ChloroSil 1000F
- Product Code
- 12.301/12.302/12.303
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Disinfectants
Manufacturers & Suppliers
Volker Gosewinkel GmbH
national supplier
D-82178 Puchheim/Obb. / Deutschland
+49 (0)89 80071835
http://www.multiman.de
Emergency Contacts
Giftnotruf Erfurt
0361 730730
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air. If experiencing respiratory symptoms: Call a doctor.
Wash with plenty of water. Take off contaminated clothing and wash it before reuse. In case of skin reactions, consult a physician.
In case of contact with eyes flush immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart and consult an ophthalmologist. Remove contact lenses, if present and easy to do. Continue rinsing.
Observe risk of aspiration if vomiting occurs. Rinse mouth immediately and drink 1 glass of of water. When in doubt or if symptoms are observed, get medical advice.
Immediate Medical Attention
If experiencing respiratory symptoms: Call a doctor. In case of skin reactions, consult a physician. In case of contact with eyes consult an ophthalmologist. When in doubt or if symptoms are observed, get medical advice.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol resistant foam, Dry extinguishing powder, Carbon dioxide (CO2), Water spray jet
Non-flammable. In case of fire may be liberated: Pyrolysis products, toxic
Co-ordinate fire-fighting measures to the fire surroundings.
Firefighter Protection
Wear a self-contained breathing apparatus and chemical protective clothing. Full protection suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Evacuate area.
Avoid release to the environment.
Absorb with liquid-binding material (sand, diatomaceous earth, acid- or universal binding agents).
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Do not breathe gas/fumes/vapour/spray. Avoid contact with skin, eyes and clothes. Use personal protection equipment.
Keep only in the original container in a cool, well-ventilated place. Keep container tightly closed. Protect against: frost. heat.
Remove contaminated, saturated clothing immediately. Draw up and observe skin protection programme. Wash hands before breaks and after work. When using do not eat, drink, smoke, sniff.
Usual measures for fire prevention.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation as well as local exhaustion at critical locations.
Wear suitable gloves tested to EN374. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves.
Use eye protection according to EN 166.
In case of inadequate ventilation wear respiratory protection.
Wear suitable protective clothing.
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
No hazardous reaction when handled and stored according to provisions.
Reacts with: acid. Formation of: Chlorine (Cl2)
frost. heat.
acid.
In case of fire may be liberated: Pyrolysis products, toxic
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of waste according to applicable legislation.
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil. Dispose of waste according to applicable legislation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Silver, as Ag+)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MultiMan® ChloroSil 1000F?
The signal word is warning.
What is the physical form of MultiMan® ChloroSil 1000F?
MultiMan® ChloroSil 1000F is a liquid with colourless color. It has odourless odor.
What is the solubility of MultiMan® ChloroSil 1000F?
not determined
What is MultiMan® ChloroSil 1000F used for?
Disinfectants
What are the hazard statements for MultiMan® ChloroSil 1000F?
This substance has 2 hazard statements:
- H400: Very toxic to aquatic life.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of MultiMan® ChloroSil 1000F?
The melting point is < 0 °C and the boiling point is > 100 °C.