Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Titriplex® IV for analysis (1,2-cyclohexylenedinitrilotetraacetic acid monohydrate)
- Product Code
- 1.08424
- Chemical Name
- 1,2-cyclohexylenedinitrilotetraacetic acid monohydrate
Regulatory Identifiers
- CAS Number
- 125572-95-4 Check regulations →
- REACH No.
- A registration number is not available for this substance as the substance or its uses are exempted from registration, the annual tonnage does not require a registration or the registration is envisaged for a later registration deadline.
Identified Uses
Reagent for analysis
Manufacturers & Suppliers
Merck Life Science UK Limited
manufacturer
New Road, The Old Brickyard, GILLINGHAM, Dorset, SP8 4XT, UNITED KINGDOM
+44 (0)1747 833-000
Emergency Contacts
CHEMTREC
+44 (0)870 8200418
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Trans-Cyclohexane-1,2-dinitrilotetraacetic acid monohydrate EC: 236-308-9 | 125572-95-4 | 100% | Yes |
Notes
For the full text of the H-Statements mentioned in this Section, see Section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
After inhalation: fresh air.
Take off immediately all contaminated clothing. Rinse skin with water/ shower.
After eye contact: rinse out with plenty of water. Call in ophthalmologist. Remove contact lenses.
After swallowing: immediately make victim drink water (two glasses at most). Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, Foam, Carbon dioxide (CO2), Dry powder
For this substance/mixture no limitations of extinguishing agents are given.
Carbon oxides, Nitrogen oxides (NOx), Combustible. Fire may cause evolution of: nitrogen oxides. Development of hazardous combustion gases or vapours possible in the event of fire.
Suppress (knock down) gases/vapors/mists with a water spray jet.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate the danger area, observe emergency procedures, consult an expert.
Take up dry.
Related Products
Similar products with comparable safety profiles
Titriplex® II for analysis (ethylenedinitrilotetraacetic acid) ACS, Reag. Ph Eur
CAS: 60-00-4
Titriplex® III for analysis (ethylenedinitrilotetraacetic acid, disodium salt dihydrate) ACS, ISO, Reag. Ph Eur
CAS: 6381-92-6
Titriplex® III GR for analysis (ethylenedinitrilotetraacetic acid, disodium salt dihydrate) ACS, ISO, Reag. Ph Eur
---
Nitrilotriacetic acid trisodium salt monohydrate
CAS: 18662-53-8
TRIS (1.0M Tris HCl pH 7.4)
---
Nitrilotriacetic acid trisodium salt
CAS: 5064-31-3
HEXAMETHYLENETETRAMINE, REAGENT, ACS
---
tri-Sodium citrate dihydrate AnalaR NORMAPUR® ACS, Reag. Ph. Eur. analytical reagent
CAS: 6132-04-3
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
For precautions see section 2.2.
Protected from light. Tightly closed. Dry.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Material: Nitrile rubber, Minimum layer thickness: 0.11 mm, Break through time: 480 min, Material tested: KCL 741 Dermatril® L. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).
Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses
required when dusts are generated. Our recommendations on filtering respiratory protection are based on the following standards: DIN EN 143, DIN 14387 and other accompanying standards relating to the used respiratory protection system. Recommended Filter type: Filter type P2
protective clothing
Do not let product enter drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under standard ambient conditions (room temperature).
The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.
Violent reactions possible with: Oxidizing agents
no information available
No data available
In the event of fire: see section 5
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste material must be disposed of in accordance with the national and local regulations.
Leave chemicals in original containers. No mixing with other waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- Not dangerous goods
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Titriplex® IV for analysis (1,2-cyclohexylenedinitrilotetraacetic acid monohydrate)?
The signal word is warning.
What is the physical form of Titriplex® IV for analysis (1,2-cyclohexylenedinitrilotetraacetic acid monohydrate)?
Titriplex® IV for analysis (1,2-cyclohexylenedinitrilotetraacetic acid monohydrate) is a powder with white color. It has no data available odor.
What is Titriplex® IV for analysis (1,2-cyclohexylenedinitrilotetraacetic acid monohydrate) used for?
Reagent for analysis
What are the hazard statements for Titriplex® IV for analysis (1,2-cyclohexylenedinitrilotetraacetic acid monohydrate)?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation.
What is the melting point of Titriplex® IV for analysis (1,2-cyclohexylenedinitrilotetraacetic acid monohydrate)?
The melting point is No data available and the boiling point is No data available.