Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FILL 126 bio-607 mastic
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
REFRATTARI GENERALI S.R.L.
manufacturer
Via Giovanni XXIII 19, 20014 NERVIANO MI
0331-58.56.82
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Soluble alkaline-vitreous fibre + organic binders and colloidal silicon.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Soluble alkaline-vitreous fibre | --- | --- | No |
| organic binders | --- | --- | No |
| colloidal silicon | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Take fresh air, drink water in order to clear the throat and blow nose to evacuate fibres.
Symptoms: Irritation or pain in the throat and nose. In the case of excessive exposure, possible congestion.
Rinse areas involved with water and wash with soap. Do not use detergents.
Symptoms: Temporary irritation or exanthema.
Wash abundantly with water. In case of contact with eyes, keep an eye-cup at disposal.
Symptoms: Temporary irritation or inflammation.
Drink large quantities of water.
Symptoms: It may cause transitory irritation and trouble to gastroenteric system.
Immediate Medical Attention
Consult doctor if ailments persist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing agent suitable for surrounding combustible materials.
Non combustible products. Packaging and surrounding materials may be combustible.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Restore the situation to normal as quickly as possible.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The process or processes should be designed to limit the amount of handling. Whenever possible, handling should be carried out under controlled conditions (i.e. use dust exhaust system). Regular good housekeeping will minimise secondary dust dispersal.
Store in original packaging in dry area whilst awaiting use. Always use sealed and visibly labelled containers. Avoid damaging containers.
Regular good housekeeping will minimise secondary dust dispersal.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use of gloves is important.
Wear protective glasses with lateral protection pieces. Do not use contact lenses.
For dust concentrations below the exposure limit value, RPE is not required but FFP 2 respirators may be used on a voluntary basis.
Wear overalls which are loose around wrists and neck.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
heating above 900°C for sustained periods
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
disposed of at landfill, which has been licensed for this purpose
expert guidance should be sought
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
AES wools are exonerated from carcinogen classification under criteria listed in nota Q of Directive 67/548/EEC due to low pulmonary biopersistence measured by the methods specified in EU and German regulation (EU protocol ECB/TM/27 rev. 7) and German method as specified in TRGS 905 (1999).
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FILL 126 bio-607 mastic?
The signal word is no signal word.
What is the physical form of FILL 126 bio-607 mastic?
FILL 126 bio-607 mastic is a solid appearing as white .
What is the melting point of FILL 126 bio-607 mastic?
The melting point is > 1500°C .