NextSDS Logo
Safety Data Sheet EN

SUPER K05 CHUCK GREASE ®

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
SUPER K05 CHUCK GREASE ®
Product Code
11139101

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricants and lubricant additives

Manufacturers & Suppliers

T

Talega Products Inc

manufacturer

23 Via Fontibre, San Clemente, CA

Emergency Contacts

Emergency Contact

(872) 333-2330

24 Hour

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Irrit. Cat. 2A
Skin Sens. Cat. 1
Repr. Cat. 1B

GHS Pictograms

GHS07 - Health hazard

GHS07

GHS08 - Serious health hazard

GHS08

Hazard Statements

H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H360FD May damage fertility. May damage the unborn child.

Precautionary Statements

P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and understood.
P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P264 Wash skin thoroughly after handling.
P272 Contaminated work clothing must not be allowed out of the workplace.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P302 + P352 IF ON SKIN: Wash with plenty of soap and water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P333 + P313 If skin irritation or rash occurs: Get medical advice/ attention.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Organic grease

Chemical Name CAS Number Concentration Hazardous
Dec-1-ene, homopolymer, hydrogenated 68037-01-4 52 - 78% Yes
Molybdenum sulfide 1317-33-5 1 - 1.5% Yes
Phosphorodithioic Acid, mixed O,O-bis(iso-Bu andPentyl) Esters, Zinc Salts 68457-79-4 1 - 1.4% Yes
Boric Acid, Potassium Salt 12712-38-8 0.41 - 0.51% Yes
Naphthenic acids 1338-24-5 0.24 - 0.36% Yes

Notes

Hazardous ingredients

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. Get medical attention.

Skin contact

In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Eye contact

In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lens, if worn. Get medical attention.

Ingestion

If swallowed, DO NOT induce vomiting. Get medical attention. Rinse mouth thoroughly with water.

Immediate Medical Attention

Get medical attention.

Medical Treatment

Treat symptomatically and supportively.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water spray, Alcohol-resistant foam, Carbon dioxide (CO2), Dry chemical

Unsuitable media

None known.

Specific hazards

Exposure to combustion products may be a hazard to health.

Instructions

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray to cool unopened containers. Remove undamaged containers from fire area if it is safe to do so. Evacuate area.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protective equipment. Follow safe handling advice and personal protective equipment recommendations.

Large spill

For large spills, provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in appropriate container.

Environmental

Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water.

Cleanup methods

Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbent.

Materials: inert absorbent material, suitable absorbent

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not get on skin or clothing. Do not swallow. Do not get in eyes. Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment. Keep container tightly closed. Take care to prevent spills, waste and minimize release to the environment.

Storage

Keep in properly labeled containers. Store locked up. Keep tightly closed. Store in accordance with the particular national regulations.

Hygiene

Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Minimize workplace exposure concentrations. Use with local exhaust ventilation. Dust formation may be relevant in the processing of this product. In addition to substance-specific OELs, general limitations of concentrations of particulates in the air at workplaces have to be considered in workplace risk assessment. Relevant limits include: OSHA PEL for Particulates Not Otherwise Regulated of 15 mg/m3 - total dust, 5 mg/m3 - respirable fraction; and ACGIH TWA for Particles (insoluble or poorly soluble) Not Otherwise Specified of 3 mg/m3 - respirable particles, 10 mg/m3 - inhalable particles.

Hands

Material : Chemical-resistant gloves. Remarks : Choose gloves to protect hands against chemicals depending on the concentration specific to place of work. Breakthrough time is not determined for the product. Change gloves often! For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer. Wash hands before breaks and at the end of workday.

Eyes

Wear the following personal protective equipment: Safety goggles

Respiratory

General and local exhaust ventilation is recommended to maintain vapor exposures below recommended limits. Where concentrations are above recommended limits or are unknown, appropriate respiratory protection should be worn. Follow OSHA respirator regulations (29 CFR 1910.134) and use NIOSH/MSHA approved respirators. Protection provided by air purifying respirators against exposure to any hazardous chemical is limited. Use a positive pressure air supplied respirator if there is any potential for uncontrolled release, exposure levels are unknown, or any other circumstance where air purifying respirators may not provide adequate protection.

Skin/Body

Select appropriate protective clothing based on chemical resistance data and an assessment of the local exposure potential. Skin contact must be avoided by using impervious protective clothing (gloves, aprons, boots, etc).

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Grease
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Grease
Colour
dark gray
Colour Intensity
---
Form
---
Odor
slight
Odor Threshold
No data available
Ph
Not applicable
Melting Point
No data available
Boiling Point
Not applicable
Flash Point
> 230 °C
Freezing Point
No data available
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not applicable
Vapor Pressure
Not applicable
Vapor Density
---
Relative Density
0.87
Bulk Density
---
Density
---
Flammability
Not classified as a flammability hazard
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
---
Partition Coefficient
No data available
Solubility In Water
No data available
Solubility In Fat
---
Molecular Weight
No data available
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

Not classified as a reactivity hazard.

Hazardous reactions

Can react with strong oxidizing agents.

Avoid

None known.

Incompatible

Oxidizing agents

Decomposition

No hazardous decomposition products are known.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
Environmentally hazardous substance, solid, n.o.s. (Naphthenic acids)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for SUPER K05 CHUCK GREASE ®?

The signal word is danger.

What is the physical form of SUPER K05 CHUCK GREASE ®?

SUPER K05 CHUCK GREASE ® is a grease appearing as grease with dark gray color. It has slight odor.

What is SUPER K05 CHUCK GREASE ® used for?

Lubricants and lubricant additives

What are the hazard statements for SUPER K05 CHUCK GREASE ®?

This substance has 3 hazard statements:

  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.
  • H360FD: May damage fertility. May damage the unborn child.

What is the melting point of SUPER K05 CHUCK GREASE ®?

The melting point is No data available and the boiling point is Not applicable.