Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LCH 05
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
A special cooling fluid suitable for all welding equipment
Manufacturers & Suppliers
LOTNIK Sp. Z o.o.
manufacturer
ul. Robotnicza 7, 25-662 Kielce
Emergency Contacts
Emergency Contact
41 362 62 62
8.00 – 16.00
general emergency telephone number
112
fire-brigade
998
ambulance
999
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
In the event of dizziness or nausea, remove casualty to fresh air, if symptoms persist, obtain medical advice.
Symptoms: dizziness, nausea, irritation of mucous membranes of the respiratory system
Remove contaminated clothing, wash affected skin with soap and water, rinse thoroughly with water, in case of irritation or redness contact your doctor.
Symptoms: chemical irritation of the skin
Rinse for several minutes (about 15) with plenty of water, holding eyelids apart. Avoid strong stream, due to the risk of corneal damage, contact your doctor.
Symptoms: chemical irritation of eyes
Do not induce vomiting, drink plenty of water, rinse your mouth with water, immediately contact your doctor.
Symptoms: irritation of the mucous membranes of mouth, gastrointestinal tract. There may be symptoms of food poisoning, abdominal pain, nausea, vomiting. Ingestion of large amounts of the product can cause damage to internal organs, liver, kidneys.
Immediate Medical Attention
Immediately contact your doctor for ingestion. Contact your doctor for eye contact, skin contact (if irritation or redness), or inhalation (if symptoms persist).
Medical Treatment
The decision about how to conduct the physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
foam, dry powder extinguishers, CO₂, water spray. Use appropriate extinguishing method for conditions.
Water with full jet
During a fire, high temperature, release toxic decomposition products containing carbon oxides.
Containers in fire area cooled with water spray, if it is possible to remove the danger zone.
Firefighter Protection
In the event of a fire in a confined space should wear protective clothing and breathing apparatus with compressed air.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
For non-emergency personnel: notify the appropriate service. Remove from the hazardous area who does not participate in liquidation of failure. For emergency responders: Ensure adequate ventilation. Use personal protective equipment. Do not breathe vapors.
Prevent from spreading or escaping into drains and reservoirs.
Absorb with inert, absorbent material. The contaminated material is placed in properly labeled containers for disposal in accordance with applicable regulations.
Materials: inert, absorbent material (such as sand, earth, vermiculite, diatomaceous earth, etc.)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes. Avoid contact with skin. Avoid inhalation of vapors. Follow the instructions provided on the label and instructions for use.
Store in a cool (storage temperature should not exceed 30°C), dry, well ventilated place in properly labeled and tightly closed original container. Avoid direct sunlight and heat sources, hot surfaces and open flames.
Do not eat, drink and smoke at work, wash your hands after use, remove contaminated clothing and protective equipment before entering places for meals.
Avoid sources of ignition, heat, hot surfaces and open flames.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
It is recommended to use proper ventilation.
Wear protective gloves resistant to chemicals made of neoprene, rubber or PVC compatible with EN374. The selection of suitable gloves does not only depend on the material, but also on the brand and quality resulting from differences in manufacturers. Resistance of the material, the glove can be determined after the tests. The exact time of the destruction of the protective gloves must be determined by the manufacturer.
Use safety glasses (according to EN 166)
Avoid inhalation of vapors. Use personal respiratory protection. In the case of risk of inhalation of concentrated vapors, use the mask with a filter A or universal (class 1,2 or 3) according to EN 141.
Wear protective clothing working - wash regularly.
Prevent the spread in the environment and enter drains and watercourses.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use, storage and transport.
No information available.
No date.
Avoid direct sunlight, heat, open flames, hot surfaces.
Avoid contact with strong oxidizing agents.
At high temperatures, they release toxic products of decomposition - carbon oxides.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal of waste and reusable packaging should be addressed by specialized companies, the manner of waste disposal to be agreed with the competent department of environmental terrain.
The residue was stored in their original containers. Dispose of in accordance with applicable regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LCH 05?
The signal word is warning.
What is the physical form of LCH 05?
LCH 05 is a liquid appearing as liquid with colorless color. It has sweet odor.
What is the solubility of LCH 05?
In water: soluble; soluble in acetone, ethanol, acetic acid, pyridine; insoluble in carbon tetrachloride
What is LCH 05 used for?
A special cooling fluid suitable for all welding equipment
What are the hazard statements for LCH 05?
This substance has 1 hazard statement:
- H302: Harmful if swallowed.
What is the melting point of LCH 05?
The melting point is App. -13°C and the boiling point is App. 197,6°C.