NextSDS Logo
Safety Data Sheet EN

Thermofix

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Thermofix
Product Code
125217

Regulatory Identifiers

CAS Number
N/A

Manufacturers & Suppliers

KERAMAB N.V. logo

KERAMAB N.V.

Haverheidelaan 4 B-9140 TEMSE, Belgium

+32 (0)3 711.02.78

www.keramab.com

I

INSULCON B.V.

The Netherlands

+31 (0)167-565750

I

INSULCON GMBH

Germany

+49 (0)2131 408548-0

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2 H315
Eye Irrit. Cat. 2 H319

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation
H319 Causes serious eye irritation

Precautionary Statements

P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water/
P332+P313 If skin irritation occurs: Get medical advice/attention.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses. If present and easy to do. Continue rinsing.

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Fibre Minerale Synthetique EC: 238-878-4 14808-60-7 2.5% Yes
Fibre Minerale Synthetique EC: 238-878-4 14808-60-7 2.5% Yes
Sodium Hydroxide EC: 215-185-5 1310-73-2 2.5% Yes

Notes

Information on ingredients: (1) Substance for which maximum workplace exposure limits are available.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Skin contact

Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Watch out for any remaining product between skin and clothing, watches, shoes, etc.

Symptoms: If the contaminated area is widespread and/or there is damage to the skin.

Eye contact

Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.

Symptoms: If there is any redness, pain or visual impairment, consult an ophthalmologist.

Ingestion

Do not give the patient anything orally. In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor. Keep the person exposed at rest. Do not force vomiting. Seek medical attention immediately, showing the label. If swallowed accidentally, call a doctor to ascertain whether observation and hospital care will be necessary. Show the label.

Immediate Medical Attention

If there is any redness, pain or visual impairment, consult an ophthalmologist. If the contaminated area is widespread and/or there is damage to the skin, a doctor must be consulted or the patient transferred to hospital. Seek medical attention immediately, showing the label. If swallowed accidentally, call a doctor to ascertain whether observation and hospital care will be necessary. Show the label.

Medical Treatment

No data available.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

The data for this section has not been processed yet.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

The data for this section has not been processed yet.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

The data for this section has not been processed yet.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure that there is adequate ventilation, especially in confined areas.

Hands

Wear suitable protective gloves in the event of prolonged or repeated skin contact. Use suitable protective gloves that are resistant to chemical agents in accordance with standard EN374. Gloves must be selected according to the application and duration of use at the workstation. Protective gloves need to be selected according to their suitability for the workstation in question : other chemical products that may be handled, necessary physical protections (cutting, pricking, heat protection), level of dexterity required. Type of gloves recommended: - Natural latex - Nitrile rubber (butadiene-acrylonitrile copolymer rubber (NBR)) - PVC (polyvinyl chloride) - Butyl Rubber (Isobutylene-isoprene copolymer) Recommended properties: - Impervious gloves in accordance with standard EN374

Eyes

Avoid contact with eyes. Use eye protectors designed to protect against liquid splashes. Before handling, wear safety goggles with protective sides accordance with standard EN166. In the event of high danger, protect the face with a face shield. Prescription glasses are not considered as protection. Individuals wearing contact lenses should wear prescription glasses during work where they may be exposed to irritant vapours. Provide eyewash stations in facilities where the product is handled constantly.

Skin/Body

Avoid skin contact. Wear suitable protective clothing. Suitable type of protective clothing: In the event of substantial spatter, wear liquid-tight protective clothing against chemical risks (type 3) in accordance with EN14605 to prevent skin contact. In the event of a risk of splashing, wear protective clothing against chemical risks (type 6) in accordance with EN13034 to prevent skin contact. Work clothing worn by personnel shall be laundered regularly. After contact with the product, all parts of the body that have been soiled must be washed.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Viscous liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
---
Colour Intensity
---
Form
---
Odor
---
Odor Threshold
---
Ph
Not relevant.
Melting Point
not relevant.
Boiling Point
not relevant.
Flash Point
not relevant.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
not relevant.
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
- 1
Flammability
---
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
not relevant.
Decomposition Temperature
not relevant.
Solubility
---
Partition Coefficient
---
Solubility In Water
Insoluble.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

The data for this section has not been processed yet.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Thermofix?

The signal word is warning.

What is the physical form of Thermofix?

Thermofix is a viscous liquid. .

What are the hazard statements for Thermofix?

This substance has 2 hazard statements:

  • H315: Causes skin irritation
  • H319: Causes serious eye irritation

What is the melting point of Thermofix?

The melting point is not relevant. and the boiling point is not relevant..

Compliance Scanner

Scan your compliance