Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Thixofix 40ml Tube
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- 6DE0-UOAR-Q00M-KDKX
Identified Uses
Adhesive
Uses advised against
All uses not specified in this section or in section 7.3
Manufacturers & Suppliers
ALPHA ADHESIVES & SEALANTS LTD
Llewellyn Close, Sandy Lane Industrial Estate DY13 9RH Stourport-on-Severn - Worcestershire - United Kingdom
Emergency Contacts
Emergency Contact
+44 (0)1299 828626
08:30 to 17:00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS09
GHS07
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture composed of polymers and resins in solvent
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C7-C9,n-alkanes, iso-alkanes, cyclics | --- | 25 - 60% | Yes |
| Butanone | 78-93-3 | 10 - 25% | Yes |
| Ethyl acetate | 141-78-6 | 10 - 25% | Yes |
| acetone | 67-64-1 | 10 - 25% | Yes |
| Rosin | 8050-09-7 | 0.1 - 1% | Yes |
To obtain more information on the hazards of the substances consult sections 11, 12 and 16.
Notes
In accordance with Annex II of The REACH etc. (Amendment etc.) (EU Exit) Regulations 2020, the product contains:
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the person affected from the area of exposure, provide with fresh air and keep at rest. In serious cases such as cardiorespiratory failure, artificial resuscitation techniques will be necessary (mouth to mouth resuscitation, cardiac massage, oxygen supply,etc.) requiring immediate medical assistance.
In case of skin contact it is recommended to remove contaminated clothes and shoes, rinse the skin or if necessary shower the affected person thoroughly with cold water and neutral soap. In case of serious reaction consult a doctor.
Rinse eyes thoroughly with lukewarm water for at least 15 minutes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case this could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS of the product.
Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion.
Immediate Medical Attention
In serious cases such as cardiorespiratory failure, immediate medical assistance is required. After eye contact, a doctor should be consulted as quickly as possible with the SDS of the product. In case of serious skin reaction consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
The data for this section has not been processed yet.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
The data for this section has not been processed yet.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
The data for this section has not been processed yet.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical protective gloves (Material: Linear low -density polyethylene (LLDPE), Breakthrough time: > 480 min, Thickness: 0.062 mm). Replace the gloves at any sign of deterioration. As the product is a mixture of several substances, the resistance of the glove material can not be calculated in advance with total reliability and has therefore to be checked prior to the application.
Face shield. Clean daily and disinfect periodically according to the manufacturer 's instructions. Use if there is a risk of splashing.
Filter mask for gases and vapours. Replace when there is a taste or smell of the contaminant inside the face mask. If the contaminant comes with warnings it is recommended to use isolation equipment.
Disposable clothing for protection against chemical risks, with antistatic and fireproof properties. For professional use only. Clean periodically according to the manufacturer's instructions. Safety footwear for protection against chemical risk, with antistatic and heat resistant properties. Replace boots at any sign of deterioration.
In accordance with the community legislation for the protection of the environment it is recommended to avoid environmental spillage of both the product and its container. For additional information see subsection 7.1.D. The Volatile Organic Compounds in Paints, Varnishes and Vehicle Refinishing Products Regulations 2012: V.O.C. (Supply): 72.14 % weight. V.O.C. density at 20 C: Non-applicable.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The data for this section has not been processed yet.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1133
- Shipping Name
- ADHESIVES
- Transport Class
- 3
- Packing Group
- II
Physico-Chemical properties: see section 9
Special regulations: Non-applicable Physico-Chemical properties: see section 9
Physico-Chemical properties: see section 9
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Thixofix 40ml Tube?
The signal word is danger.
What is the physical form of Thixofix 40ml Tube?
Thixofix 40ml Tube is a liquid appearing as translucent with amber color. It has solvent odor.
What is the solubility of Thixofix 40ml Tube?
Non-applicable *
What is Thixofix 40ml Tube used for?
Adhesive
What are the hazard statements for Thixofix 40ml Tube?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of Thixofix 40ml Tube?
The melting point is Non-applicable * and the boiling point is 56 C.